pvlib · kandersolar · Sep 19, 2023 · Sep 7, 2023 · Sep 7, 2023 · Sep 7, 2023
diff --git a/docs/examples/shading/plot_simple_irradiance_adjustment_for_horizon_shading.py b/docs/examples/shading/plot_simple_irradiance_adjustment_for_horizon_shading.py
@@ -0,0 +1,118 @@
+"""
+Simple irradiance adjustment for horizon shading
+================================================
+
+Example of applying horizon shading to dni and global poa. Using
+horizon profile data, this example interpolates it to time-series
+solar-position data, and adjust DNI and POA-global irradiance.
+"""
+
+# %%
+# This example shows how to use horizon elevation angles with
+# corresponding horizon azimuth angles for simple horizon shading adjustments.
+#
+# After location information and a date range is established, solar position
+# data is calculated using :py:func:`pvlib.solarposition.get_solarposition`.
+# Horizon data is assigned, and interpolated to the solar azimuth time
+# series data. Finally, in times when solar elevation is greater than the
+# interpolated horizon elevation angle, DNI is set to 0.
+
+import numpy as np
+import pandas as pd
+import pvlib
+
+# Golden, CO
+latitude, longitude = 39.76, -105.22
+tz = 'MST'
+
+# Set times in the morning of the December solstice.
+times = pd.date_range(
+    '2020-12-20 6:30', '2020-12-20 9:00', freq='1T', tz=tz
+)
+
+# Create location object, and get solar position and clearsky irradiance data.
+location = pvlib.location.Location(latitude, longitude, tz)
+solar_position = location.get_solarposition(times)
+clearsky = location.get_clearsky(times)
+
+# Assign variable names for easier reading.
+surface_tilt = 30
+surface_azimuth = 180
+solar_azimuth = solar_position.azimuth
+solar_zenith = solar_position.apparent_zenith
+solar_elevation = solar_position.apparent_elevation
+dni = clearsky.dni
+ghi = clearsky.ghi
+dhi = clearsky.dhi
+
+# %%
+# With basic inputs in place, let's perform the adjustment for horizon shading:
+
+# Use hard-coded horizon profile data from location object above.
+horizon_profile = pd.Series([
+    10.7, 11.8, 11.5, 10.3, 8.0, 6.5, 3.8, 2.3, 2.3, 2.3, 4.6, 8.0, 10.3, 11.1,
+    10.7, 10.3, 9.2, 6.1, 5.3, 2.3, 3.1, 1.9, 1.9, 2.7, 3.8, 5.3, 6.5, 8.4,
+    8.8, 8.4, 8.4, 8.4, 6.5, 6.1, 6.5, 6.1, 7.3, 9.2, 8.4, 8.0, 5.7, 5.3, 5.3,
+    4.2, 4.2, 4.2, 7.3, 9.5
+], index=np.arange(0, 360, 7.5))
+
+ax = horizon_profile.plot(xlim=(0, 360), ylim=(0, None), figsize=(6, 2.5))
+ax.set_title('Horizon profile')
+ax.set_xticks([0, 90, 180, 270, 360])
+ax.set_xlabel('Azimuth [°]')
+ax.set_ylabel('Horizon angle [°]')
+
+# %%
+# .. admonition:: Horizon data from PVGIS
+#
+#     Example of how to get the above horizon data from PVGIS
+#
+#     horizon_profile, horizon_metadata = pvlib.iotools.get_pvgis_horizon(
+#         latitutde, longitude)
+#
+
+# Interpolate the horizon elevation data to the solar azimuth, and keep as a
+# numpy array.
+horizon_elevation_data = np.interp(
+    solar_azimuth, horizon_profile.index, horizon_profile
+)
+
+# Convert to Pandas Series for easier usage.
+horizon_elevation_data = pd.Series(horizon_elevation_data, times)
+
+# Adjust DNI based on data - note this is returned as numpy array
+dni_adjusted = np.where(solar_elevation > horizon_elevation_data, dni, 0)
+
+# Adjust GHI and set it to DHI for time-periods where 'dni_adjusted' is 0.
+# Note this is returned as numpy array
+ghi_adjusted = np.where(dni_adjusted == 0, dhi, ghi)
+
+# Transposition using the original and adjusted irradiance components.
+irrad_pre_adj = pvlib.irradiance.get_total_irradiance(
+    surface_tilt, surface_azimuth, solar_zenith, solar_azimuth, dni, ghi, dhi
+)
+
+irrad_post_adj = pvlib.irradiance.get_total_irradiance(
+    surface_tilt, surface_azimuth, solar_zenith, solar_azimuth, dni_adjusted,
+    ghi_adjusted, dhi
+)
+
+# Create and plot result DataFrames.
+poa_global_comparison = pd.DataFrame({
+    'poa_global_pre-adjustment': irrad_pre_adj.poa_global,
+    'poa_global_post-adjustment': irrad_post_adj.poa_global
+})
+
+dni_comparison = pd.DataFrame({
+    'dni_pre-adjustment': dni,
+    'dni_post-adjustment': dni_adjusted
+})
+
+# Plot results
+poa_global_comparison.plot(
+    title='POA-Global: Before and after Horizon Adjustment',
+    ylabel='Irradiance'
+)
+dni_comparison.plot(
+    title='DNI: Before and after Horizon Adjustment', ylabel='Irradiance'
+)
diff --git a/docs/sphinx/source/whatsnew/v0.10.2.rst b/docs/sphinx/source/whatsnew/v0.10.2.rst
@@ -56,6 +56,8 @@ Documentation
   (:issue:`1724`, :pull:`1838`)
 * Update definition of snow events parameter for :py:func:`pvlib.snow.loss_townsend`.
   (:issue:`1839`, :pull:`1840`)
+* Added gallery example demonstrating how horizon profile data from :py:func:`pvlib.iotools.get_pvgis_horizon`, 
+  can be used to apply horizon shading to time series dni and global poa data. (:pull:`1849`)
 
 Requirements
 ~~~~~~~~~~~~
@@ -72,4 +74,5 @@ Contributors
 * Anton Driesse (:ghuser:`adriesse`)
 * Lukas Grossar (:ghuser:`tongpu`)
 * Areeba Turabi (:ghuser:`aturabi`)
+* Saurabh Aneja (:ghuser:`spaneja`)
 * Miroslav Šedivý (:ghuser:`eumiro`)