gitpython-developers · Byron · Oct 3, 2023 · Oct 3, 2023 · Oct 3, 2023 · Oct 3, 2023
diff --git a/git/cmd.py b/git/cmd.py
@@ -66,10 +66,10 @@
     "with_extended_output",
     "with_exceptions",
     "as_process",
-    "stdout_as_string",
     "output_stream",
-    "with_stdout",
+    "stdout_as_string",
     "kill_after_timeout",
+    "with_stdout",
     "universal_newlines",
     "shell",
     "env",
@@ -105,7 +105,7 @@ def handle_process_output(
 ) -> None:
     """Registers for notifications to learn that process output is ready to read, and dispatches lines to
     the respective line handlers.
-    This function returns once the finalizer returns
+    This function returns once the finalizer returns.
 
     :return: result of finalizer
     :param process: subprocess.Popen instance
@@ -294,9 +294,7 @@ def __setstate__(self, d: Dict[str, Any]) -> None:
 
     @classmethod
     def refresh(cls, path: Union[None, PathLike] = None) -> bool:
-        """This gets called by the refresh function (see the top level
-        __init__).
-        """
+        """This gets called by the refresh function (see the top level __init__)."""
         # discern which path to refresh with
         if path is not None:
             new_git = os.path.expanduser(path)
@@ -446,9 +444,9 @@ def polish_url(cls, url: str, is_cygwin: Union[None, bool] = None) -> PathLike:
         if is_cygwin:
             url = cygpath(url)
         else:
-            """Remove any backslahes from urls to be written in config files.
+            """Remove any backslashes from urls to be written in config files.
 
-            Windows might create config-files containing paths with backslashed,
+            Windows might create config files containing paths with backslashes,
             but git stops liking them as it will escape the backslashes.
             Hence we undo the escaping just to be sure.
             """
@@ -464,8 +462,8 @@ def check_unsafe_protocols(cls, url: str) -> None:
         Check for unsafe protocols.
 
         Apart from the usual protocols (http, git, ssh),
-        Git allows "remote helpers" that have the form `<transport>::<address>`,
-        one of these helpers (`ext::`) can be used to invoke any arbitrary command.
+        Git allows "remote helpers" that have the form ``<transport>::<address>``,
+        one of these helpers (``ext::``) can be used to invoke any arbitrary command.
 
         See:
 
@@ -517,7 +515,7 @@ def __init__(self, proc: Union[None, subprocess.Popen], args: Any) -> None:
             self.status: Union[int, None] = None
 
         def _terminate(self) -> None:
-            """Terminate the underlying process"""
+            """Terminate the underlying process."""
             if self.proc is None:
                 return
 
@@ -572,7 +570,7 @@ def wait(self, stderr: Union[None, str, bytes] = b"") -> int:
             """Wait for the process and return its status code.
 
             :param stderr: Previously read value of stderr, in case stderr is already closed.
-            :warn: may deadlock if output or error pipes are used and not handled separately.
+            :warn: May deadlock if output or error pipes are used and not handled separately.
             :raise GitCommandError: if the return status is not 0"""
             if stderr is None:
                 stderr_b = b""
@@ -605,13 +603,12 @@ def read_all_from_possibly_closed_stream(stream: Union[IO[bytes], None]) -> byte
     # END auto interrupt
 
     class CatFileContentStream(object):
-
         """Object representing a sized read-only stream returning the contents of
         an object.
         It behaves like a stream, but counts the data read and simulates an empty
         stream once our sized content region is empty.
-        If not all data is read to the end of the objects's lifetime, we read the
-        rest to assure the underlying stream continues to work"""
+        If not all data is read to the end of the object's lifetime, we read the
+        rest to assure the underlying stream continues to work."""
 
         __slots__: Tuple[str, ...] = ("_stream", "_nbr", "_size")
 
@@ -740,11 +737,11 @@ def __getattr__(self, name: str) -> Any:
 
     def set_persistent_git_options(self, **kwargs: Any) -> None:
         """Specify command line options to the git executable
-        for subsequent subcommand calls
+        for subsequent subcommand calls.
 
         :param kwargs:
             is a dict of keyword arguments.
-            these arguments are passed as in _call_process
+            These arguments are passed as in _call_process
             but will be passed to the git command rather than
             the subcommand.
         """
@@ -775,7 +772,7 @@ def version_info(self) -> Tuple[int, int, int, int]:
         """
         :return: tuple(int, int, int, int) tuple with integers representing the major, minor
             and additional version numbers as parsed from git version.
-            This value is generated on demand and is cached"""
+            This value is generated on demand and is cached."""
         return self._version_info
 
     @overload
@@ -842,16 +839,16 @@ def execute(
         strip_newline_in_stdout: bool = True,
         **subprocess_kwargs: Any,
     ) -> Union[str, bytes, Tuple[int, Union[str, bytes], str], AutoInterrupt]:
-        """Handles executing the command on the shell and consumes and returns
-        the returned information (stdout)
+        """Handles executing the command and consumes and returns the returned
+        information (stdout).
 
         :param command:
             The command argument list to execute.
-            It should be a string, or a sequence of program arguments. The
+            It should be a sequence of program arguments, or a string. The
             program to execute is the first item in the args sequence or string.
 
         :param istream:
-            Standard input filehandle passed to subprocess.Popen.
+            Standard input filehandle passed to `subprocess.Popen`.
 
         :param with_extended_output:
             Whether to return a (status, stdout, stderr) tuple.
@@ -862,8 +859,7 @@ def execute(
         :param as_process:
             Whether to return the created process instance directly from which
             streams can be read on demand. This will render with_extended_output and
-            with_exceptions ineffective - the caller will have
-            to deal with the details himself.
+            with_exceptions ineffective - the caller will have to deal with the details.
             It is important to note that the process will be placed into an AutoInterrupt
             wrapper that will interrupt the process once it goes out of scope. If you
             use the command in iterators, you should pass the whole process instance
@@ -876,13 +872,34 @@ def execute(
             always be created with a pipe due to issues with subprocess.
             This merely is a workaround as data will be copied from the
             output pipe to the given output stream directly.
-            Judging from the implementation, you shouldn't use this flag !
+            Judging from the implementation, you shouldn't use this parameter!
 
         :param stdout_as_string:
-            if False, the commands standard output will be bytes. Otherwise, it will be
-            decoded into a string using the default encoding (usually utf-8).
+            If False, the command's standard output will be bytes. Otherwise, it will be
+            decoded into a string using the default encoding (usually UTF-8).
             The latter can fail, if the output contains binary data.
 
+        :param kill_after_timeout:
+            Specifies a timeout in seconds for the git command, after which the process
+            should be killed. This will have no effect if as_process is set to True. It is
+            set to None by default and will let the process run until the timeout is
+            explicitly specified. This feature is not supported on Windows. It's also worth
+            noting that kill_after_timeout uses SIGKILL, which can have negative side
+            effects on a repository. For example, stale locks in case of ``git gc`` could
+            render the repository incapable of accepting changes until the lock is manually
+            removed.
+
+        :param with_stdout:
+            If True, default True, we open stdout on the created process.
+
+        :param universal_newlines:
+            if True, pipes will be opened as text, and lines are split at
+            all known line endings.
+
+        :param shell:
+            Whether to invoke commands through a shell (see `Popen(..., shell=True)`).
+            It overrides :attr:`USE_SHELL` if it is not `None`.
+
         :param env:
             A dictionary of environment variables to be passed to `subprocess.Popen`.
 
@@ -891,38 +908,23 @@ def execute(
             one invocation of write() method. If the given number is not positive then
             the default value is used.
 
+        :param strip_newline_in_stdout:
+            Whether to strip the trailing ``\\n`` of the command stdout.
+
         :param subprocess_kwargs:
-            Keyword arguments to be passed to subprocess.Popen. Please note that
-            some of the valid kwargs are already set by this method, the ones you
+            Keyword arguments to be passed to `subprocess.Popen`. Please note that
+            some of the valid kwargs are already set by this method; the ones you
             specify may not be the same ones.
 
-        :param with_stdout: If True, default True, we open stdout on the created process
-        :param universal_newlines:
-            if True, pipes will be opened as text, and lines are split at
-            all known line endings.
-        :param shell:
-            Whether to invoke commands through a shell (see `Popen(..., shell=True)`).
-            It overrides :attr:`USE_SHELL` if it is not `None`.
-        :param kill_after_timeout:
-            To specify a timeout in seconds for the git command, after which the process
-            should be killed. This will have no effect if as_process is set to True. It is
-            set to None by default and will let the process run until the timeout is
-            explicitly specified. This feature is not supported on Windows. It's also worth
-            noting that kill_after_timeout uses SIGKILL, which can have negative side
-            effects on a repository. For example, stale locks in case of git gc could
-            render the repository incapable of accepting changes until the lock is manually
-            removed.
-        :param strip_newline_in_stdout:
-            Whether to strip the trailing ``\\n`` of the command stdout.
         :return:
             * str(output) if extended_output = False (Default)
             * tuple(int(status), str(stdout), str(stderr)) if extended_output = True
 
-            if output_stream is True, the stdout value will be your output stream:
+            If output_stream is True, the stdout value will be your output stream:
             * output_stream if extended_output = False
             * tuple(int(status), output_stream, str(stderr)) if extended_output = True
 
-            Note git is executed with LC_MESSAGES="C" to ensure consistent
+            Note that git is executed with ``LC_MESSAGES="C"`` to ensure consistent
             output regardless of system language.
 
         :raise GitCommandError:
@@ -971,18 +973,15 @@ def execute(
         # end handle
 
         stdout_sink = PIPE if with_stdout else getattr(subprocess, "DEVNULL", None) or open(os.devnull, "wb")
-        istream_ok = "None"
-        if istream:
-            istream_ok = "<valid stream>"
         if shell is None:
             shell = self.USE_SHELL
         log.debug(
-            "Popen(%s, cwd=%s, universal_newlines=%s, shell=%s, istream=%s)",
+            "Popen(%s, cwd=%s, stdin=%s, shell=%s, universal_newlines=%s)",
             redacted_command,
             cwd,
-            universal_newlines,
+            "<valid stream>" if istream else "None",
             shell,
-            istream_ok,
+            universal_newlines,
         )
         try:
             with maybe_patch_caller_env:
@@ -1010,8 +1009,8 @@ def execute(
         if as_process:
             return self.AutoInterrupt(proc, command)
 
-        def _kill_process(pid: int) -> None:
-            """Callback method to kill a process."""
+        def kill_process(pid: int) -> None:
+            """Callback to kill a process."""
             p = Popen(
                 ["ps", "--ppid", str(pid)],
                 stdout=PIPE,
@@ -1044,7 +1043,7 @@ def _kill_process(pid: int) -> None:
 
         if kill_after_timeout is not None:
             kill_check = threading.Event()
-            watchdog = threading.Timer(kill_after_timeout, _kill_process, args=(proc.pid,))
+            watchdog = threading.Timer(kill_after_timeout, kill_process, args=(proc.pid,))
 
         # Wait for the process to return
         status = 0
@@ -1208,7 +1207,7 @@ def _unpack_args(cls, arg_list: Sequence[str]) -> List[str]:
 
     def __call__(self, **kwargs: Any) -> "Git":
         """Specify command line options to the git executable
-        for a subcommand call
+        for a subcommand call.
 
         :param kwargs:
             is a dict of keyword arguments.
@@ -1246,7 +1245,7 @@ def _call_process(
         self, method: str, *args: Any, **kwargs: Any
     ) -> Union[str, bytes, Tuple[int, Union[str, bytes], str], "Git.AutoInterrupt"]:
         """Run the given git command with the specified arguments and return
-        the result as a String
+        the result as a string.
 
         :param method:
             is the command. Contained "_" characters will be converted to dashes,
@@ -1255,7 +1254,7 @@ def _call_process(
         :param args:
             is the list of arguments. If None is included, it will be pruned.
             This allows your commands to call git more conveniently as None
-            is realized as non-existent
+            is realized as non-existent.
 
         :param kwargs:
             It contains key-values for the following:
@@ -1385,7 +1384,7 @@ def get_object_header(self, ref: str) -> Tuple[str, str, int]:
         return self.__get_object_header(cmd, ref)
 
     def get_object_data(self, ref: str) -> Tuple[str, str, int, bytes]:
-        """As get_object_header, but returns object data as well
+        """As get_object_header, but returns object data as well.
 
         :return: (hexsha, type_string, size_as_int, data_string)
         :note: not threadsafe"""
@@ -1395,10 +1394,10 @@ def get_object_data(self, ref: str) -> Tuple[str, str, int, bytes]:
         return (hexsha, typename, size, data)
 
     def stream_object_data(self, ref: str) -> Tuple[str, str, int, "Git.CatFileContentStream"]:
-        """As get_object_header, but returns the data as a stream
+        """As get_object_header, but returns the data as a stream.
 
         :return: (hexsha, type_string, size_as_int, stream)
-        :note: This method is not threadsafe, you need one independent Command instance per thread to be safe !"""
+        :note: This method is not threadsafe, you need one independent Command instance per thread to be safe!"""
         cmd = self._get_persistent_cmd("cat_file_all", "cat_file", batch=True)
         hexsha, typename, size = self.__get_object_header(cmd, ref)
         cmd_stdout = cmd.stdout if cmd.stdout is not None else io.BytesIO()

diff --git a/test/test_git.py b/test/test_git.py
@@ -4,7 +4,7 @@
 #
 # This module is part of GitPython and is released under
 # the BSD License: https://opensource.org/license/bsd-3-clause/
-import contextlib
+import inspect
 import logging
 import os
 import os.path as osp
@@ -40,6 +40,13 @@ def tearDown(self):
 
         gc.collect()
 
+    def _assert_logged_for_popen(self, log_watcher, name, value):
+        re_name = re.escape(name)
+        re_value = re.escape(str(value))
+        re_line = re.compile(fr"DEBUG:git.cmd:Popen\(.*\b{re_name}={re_value}[,)]")
+        match_attempts = [re_line.match(message) for message in log_watcher.output]
+        self.assertTrue(any(match_attempts), repr(log_watcher.output))
+
     @mock.patch.object(Git, "execute")
     def test_call_process_calls_execute(self, git):
         git.return_value = ""
@@ -96,10 +103,8 @@ def _do_shell_combo(self, value_in_call, value_from_class):
             # git.cmd gets Popen via a "from" import, so patch it there.
             with mock.patch.object(cmd, "Popen", wraps=cmd.Popen) as mock_popen:
                 # Use a command with no arguments (besides the program name), so it runs
-                # with or without a shell, on all OSes, with the same effect. Since git
-                # errors out when run with no arguments, we swallow that error.
-                with contextlib.suppress(GitCommandError):
-                    self.git.execute(["git"], shell=value_in_call)
+                # with or without a shell, on all OSes, with the same effect.
+                self.git.execute(["git"], with_exceptions=False, shell=value_in_call)
 
         return mock_popen
 
@@ -115,14 +120,19 @@ def test_it_uses_shell_or_not_as_specified(self, case):
     def test_it_logs_if_it_uses_a_shell(self, case):
         """``shell=`` in the log message agrees with what is passed to `Popen`."""
         value_in_call, value_from_class = case
-
         with self.assertLogs(cmd.log, level=logging.DEBUG) as log_watcher:
             mock_popen = self._do_shell_combo(value_in_call, value_from_class)
+        self._assert_logged_for_popen(log_watcher, "shell", mock_popen.call_args.kwargs["shell"])
 
-        popen_shell_arg = mock_popen.call_args.kwargs["shell"]
-        expected_message = re.compile(rf"DEBUG:git.cmd:Popen\(.*\bshell={popen_shell_arg}\b.*\)")
-        match_attempts = [expected_message.fullmatch(message) for message in log_watcher.output]
-        self.assertTrue(any(match_attempts), repr(log_watcher.output))
+    @ddt.data(
+        ("None", None),
+        ("<valid stream>", subprocess.PIPE),
+    )
+    def test_it_logs_istream_summary_for_stdin(self, case):
+        expected_summary, istream_argument = case
+        with self.assertLogs(cmd.log, level=logging.DEBUG) as log_watcher:
+            self.git.execute(["git", "version"], istream=istream_argument)
+        self._assert_logged_for_popen(log_watcher, "stdin", expected_summary)
 
     def test_it_executes_git_and_returns_result(self):
         self.assertRegex(self.git.execute(["git", "version"]), r"^git version [\d\.]{2}.*$")
@@ -364,3 +374,11 @@ def counter_stderr(line):
 
         self.assertEqual(count[1], line_count)
         self.assertEqual(count[2], line_count)
+
+    def test_execute_kwargs_set_agrees_with_method(self):
+        parameter_names = inspect.signature(cmd.Git.execute).parameters.keys()
+        self_param, command_param, *most_params, extra_kwargs_param = parameter_names
+        self.assertEqual(self_param, "self")
+        self.assertEqual(command_param, "command")
+        self.assertEqual(set(most_params), cmd.execute_kwargs)  # Most important.
+        self.assertEqual(extra_kwargs_param, "subprocess_kwargs")