chore: add support for customize app_conf_default.h

fpistm · fpistm · commit 787f3fa8e404 · 2024-01-11T11:38:27.000+01:00
Signed-off-by: Frederic Pillon &lt;frederic.pillon@st.com&gt;
diff --git a/src/utility/STM32_WPAN/app_conf_default.h b/src/utility/STM32_WPAN/app_conf_default.h
@@ -50,7 +50,9 @@
 /**
  * Define Tx Power
  */
-#define CFG_TX_POWER                      (0x18) /* -0.15dBm */
+#ifndef CFG_TX_POWER
+  #define CFG_TX_POWER                        (0x18) /* -0.15dBm */
+#endif
 
 #if 0
 /**
@@ -135,13 +137,25 @@
  * Maximum number of simultaneous connections that the device will support.
  * Valid values are from 1 to 8
  */
-#define CFG_BLE_NUM_LINK            8
+#ifndef CFG_BLE_NUM_LINK
+#ifdef STM32WB15xx
+  #define CFG_BLE_NUM_LINK            3
+#else
+  #define CFG_BLE_NUM_LINK            8
+#endif
+#endif
 
 /**
  * Maximum number of Services that can be stored in the GATT database.
  * Note that the GAP and GATT services are automatically added so this parameter should be 2 plus the number of user services
  */
-#define CFG_BLE_NUM_GATT_SERVICES   8
+#ifndef CFG_BLE_NUM_GATT_SERVICES
+#ifdef STM32WB15xx
+  #define CFG_BLE_NUM_GATT_SERVICES   4
+#else
+  #define CFG_BLE_NUM_GATT_SERVICES   8
+#endif
+#endif
 
 /**
  * Maximum number of Attributes
@@ -150,7 +164,13 @@
  * Note that certain characteristics and relative descriptors are added automatically during device initialization
  * so this parameters should be 9 plus the number of user Attributes
  */
-#define CFG_BLE_NUM_GATT_ATTRIBUTES 68
+#ifndef CFG_BLE_NUM_GATT_ATTRIBUTES
+#ifdef STM32WB15xx
+  #define CFG_BLE_NUM_GATT_ATTRIBUTES 30
+#else
+  #define CFG_BLE_NUM_GATT_ATTRIBUTES 68
+#endif
+#endif
 
 /**
  * Maximum supported ATT_MTU size
@@ -186,12 +206,16 @@
 /**
  * Enable or disable the Extended Packet length feature. Valid values are 0 or 1.
  */
-#define CFG_BLE_DATA_LENGTH_EXTENSION   1
+#ifndef CFG_BLE_DATA_LENGTH_EXTENSION
+  #define CFG_BLE_DATA_LENGTH_EXTENSION   1
+#endif
 
 /**
  * Sleep clock accuracy in Peripheral mode (ppm value)
  */
-#define CFG_BLE_PERIPHERAL_SCA   500
+#ifndef CFG_BLE_PERIPHERAL_SCA
+  #define CFG_BLE_PERIPHERAL_SCA   500
+#endif
 
 /**
  * Sleep clock accuracy in Central mode
@@ -204,7 +228,9 @@
  * 6 : 21 ppm to 30 ppm
  * 7 : 0 ppm to 20 ppm
  */
-#define CFG_BLE_CENTRAL_SCA   0
+#ifndef CFG_BLE_CENTRAL_SCA
+  #define CFG_BLE_CENTRAL_SCA   0
+#endif
 
 /**
  * LsSource
@@ -213,21 +239,27 @@
  * - bit 1:   1: STM32WB5M Module device                             0: Other devices as STM32WBxx SOC, STM32WB1M module
  * - bit 2:   1: HSE/1024 Clock config                               0: LSE Clock config
  */
-#if defined(STM32WB5Mxx)
-  #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
-#else
-  #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+#ifndef CFG_BLE_LS_SOURCE
+  #if defined(STM32WB5Mxx)
+    #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+  #else
+    #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+  #endif
 #endif
 
 /**
  * Start up time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 us (~2.44 us)
  */
-#define CFG_BLE_HSE_STARTUP_TIME  0x148
+#ifndef CFG_BLE_HSE_STARTUP_TIME
+  #define CFG_BLE_HSE_STARTUP_TIME  0x148
+#endif
 
 /**
  * Maximum duration of the connection event when the device is in Peripheral mode in units of 625/256 us (~2.44 us)
  */
-#define CFG_BLE_MAX_CONN_EVENT_LENGTH  (0xFFFFFFFF)
+#ifndef CFG_BLE_MAX_CONN_EVENT_LENGTH
+  #define CFG_BLE_MAX_CONN_EVENT_LENGTH  (0xFFFFFFFF)
+#endif
 
 /**
  * Viterbi Mode
