iframe-proxy | Sunbelt Computer Software

executable file
294 lines (240 loc) · 6.96 KB
# install - install a program, script, or datafile
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
# Copyright (C) 1994 X Consortium
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# FSF changes to this file are in the public domain.
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd=$cpprog
	    continue;;
	-d) dir_arg=true
	    continue;;
	-m) chmodcmd="$chmodprog $2"
	    continue;;
	-o) chowncmd="$chownprog $2"
	    continue;;
	-g) chgrpcmd="$chgrpprog $2"
	    continue;;
	-s) stripcmd=$stripprog
	    continue;;
	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    continue;;
	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    continue;;
	*)  if [ x"$src" = x ]
		# this colon is to work around a 386BSD /bin/sh bug
	    continue;;
if [ x"$src" = x ]
	echo "$0: no input file specified" >&2
if [ x"$dir_arg" != x ]; then
	if [ -d "$dst" ]; then
		instcmd=:
		chmodcmd=""
		instcmd=$mkdirprog
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
	if [ -f "$src" ] || [ -d "$src" ]
		echo "$0: $src does not exist" >&2
	if [ x"$dst" = x ]
		echo "$0: no destination specified" >&2
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
	if [ -d "$dst" ]
		dst=$dst/`basename "$src"`
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
IFS="${IFS-$defaultIFS}"
# Some sh's can't handle IFS=/ for some reason.
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
pathcomp=''
while [ $# -ne 0 ] ; do
	pathcomp=$pathcomp$1
	if [ ! -d "$pathcomp" ] ;
        then
		$mkdirprog "$pathcomp"
	pathcomp=$pathcomp/
if [ x"$dir_arg" != x ]
	$doit $instcmd "$dst" &&
	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
# If we're going to rename the final executable, determine the name now.
	if [ x"$transformarg" = x ]
		dstfile=`basename "$dst"`
		dstfile=`basename "$dst" $transformbasename |
			sed $transformarg`$transformbasename
# don't allow the sed command to completely eliminate the filename
	if [ x"$dstfile" = x ]
		dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
	dsttmp=$dstdir/#inst.$$#
	rmtmp=$dstdir/#rm.$$#
# Trap to clean up temp files at exit.
	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
	trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
	$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location.  We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons.  In this case, the final cleanup
# might fail but the new file should still install successfully.
	if [ -f "$dstdir/$dstfile" ]
		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
		  (exit 1); exit
# Now rename the file to the real destination.
	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
# The final little trick to "correctly" pass the exit status to the exit trap.
	(exit 0); exit
Sunbelt Computer Software

PL/B Language Development and Support

Navigation Menu

Uh oh!

Uh oh!

Sunbelt Computer Software

PL/B Language Development and Support

Uh oh!

Uh oh!

FilesExpand file tree

install-sh

Latest commit

History

install-sh

File metadata and controls
