# Copyright 2012 the V8 project authors. All rights reserved.

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are

# met:

#

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above

# copyright notice, this list of conditions and the following

# disclaimer in the documentation and/or other materials provided

# with the distribution.

# * Neither the name of Google Inc. nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Variable default definitions. Override them by exporting them in your shell.

CXX ?= g++

LINK ?= g++

OUTDIR ?= out

TESTJOBS ?=

# TODO(bnoordhuis) Make i18n support configurable.

GYPFLAGS ?= -Dv8_enable_i18n_support=0

TESTFLAGS ?=

ANDROID_NDK_ROOT ?=

ANDROID_NDK_HOST_ARCH ?=

ANDROID_TOOLCHAIN ?=

ANDROID_V8 ?= /data/local/tmp/v8

NACL_SDK_ROOT ?=

# Special build flags. Use them like this: "make library=shared"

# library=shared || component=shared_library

ifeq ($(library), shared)

GYPFLAGS += -Dcomponent=shared_library

endif

ifdef component

GYPFLAGS += -Dcomponent=$(component)

endif

# console=readline

ifdef console

GYPFLAGS += -Dconsole=$(console)

endif

# disassembler=on

ifeq ($(disassembler), on)

GYPFLAGS += -Dv8_enable_disassembler=1

endif

# objectprint=on

ifeq ($(objectprint), on)

GYPFLAGS += -Dv8_object_print=1

endif

# verifyheap=on

ifeq ($(verifyheap), on)

GYPFLAGS += -Dv8_enable_verify_heap=1

endif

# backtrace=off

ifeq ($(backtrace), off)

GYPFLAGS += -Dv8_enable_backtrace=0

else

GYPFLAGS += -Dv8_enable_backtrace=1

endif

# verifypredictable=on

ifeq ($(verifypredictable), on)

GYPFLAGS += -Dv8_enable_verify_predictable=1

endif

# snapshot=off

ifeq ($(snapshot), off)

GYPFLAGS += -Dv8_use_snapshot='false'

endif

# extrachecks=on/off

ifeq ($(extrachecks), on)

GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1

endif

ifeq ($(extrachecks), off)

GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0

endif

# gdbjit=on/off

ifeq ($(gdbjit), on)

GYPFLAGS += -Dv8_enable_gdbjit=1

endif

ifeq ($(gdbjit), off)

GYPFLAGS += -Dv8_enable_gdbjit=0

endif

# vtunejit=on

ifeq ($(vtunejit), on)

GYPFLAGS += -Dv8_enable_vtunejit=1

endif

# optdebug=on

ifeq ($(optdebug), on)

GYPFLAGS += -Dv8_optimized_debug=2

endif

# unalignedaccess=on

ifeq ($(unalignedaccess), on)

GYPFLAGS += -Dv8_can_use_unaligned_accesses=true

endif

# randomseed=12345, disable random seed via randomseed=0

ifdef randomseed

GYPFLAGS += -Dv8_random_seed=$(randomseed)

endif

# soname_version=1.2.3

ifdef soname_version

GYPFLAGS += -Dsoname_version=$(soname_version)

endif

# werror=no

ifeq ($(werror), no)

GYPFLAGS += -Dwerror=''

endif

# presubmit=no

ifeq ($(presubmit), no)

TESTFLAGS += --no-presubmit

endif

# strictaliasing=off (workaround for GCC-4.5)

ifeq ($(strictaliasing), off)

GYPFLAGS += -Dv8_no_strict_aliasing=1

endif

# regexp=interpreted

ifeq ($(regexp), interpreted)

GYPFLAGS += -Dv8_interpreted_regexp=1

endif

# i18nsupport=off

ifeq ($(i18nsupport), off)

GYPFLAGS += -Dv8_enable_i18n_support=0

TESTFLAGS += --noi18n

endif

# deprecation_warnings=on

ifeq ($(deprecationwarnings), on)

GYPFLAGS += -Dv8_deprecation_warnings=1

endif

# asan=/path/to/clang++

ifneq ($(strip $(asan)),)

GYPFLAGS += -Dasan=1

export CXX=$(asan)

export CXX_host=$(asan)

export LINK=$(asan)

export ASAN_SYMBOLIZER_PATH="$(dir $(asan))llvm-symbolizer"

endif

# arm specific flags.

# arm_version=<number | "default">

ifneq ($(strip $(arm_version)),)

GYPFLAGS += -Darm_version=$(arm_version)

else

# Deprecated (use arm_version instead): armv7=false/true

ifeq ($(armv7), false)

GYPFLAGS += -Darm_version=6

else

ifeq ($(armv7), true)

GYPFLAGS += -Darm_version=7

endif

endif

endif

# hardfp=on/off. Deprecated, use armfloatabi

ifeq ($(hardfp),on)

GYPFLAGS += -Darm_float_abi=hard

else

ifeq ($(hardfp),off)

GYPFLAGS += -Darm_float_abi=softfp

endif

endif

# fpu: armfpu=xxx

# xxx: vfp, vfpv3-d16, vfpv3, neon.

ifeq ($(armfpu),)

GYPFLAGS += -Darm_fpu=default

else

GYPFLAGS += -Darm_fpu=$(armfpu)

endif

# float abi: armfloatabi=softfp/hard

ifeq ($(armfloatabi),)

ifeq ($(hardfp),)

GYPFLAGS += -Darm_float_abi=default

endif

else

GYPFLAGS += -Darm_float_abi=$(armfloatabi)

endif

# armthumb=on/off

ifeq ($(armthumb), off)

GYPFLAGS += -Darm_thumb=0

else

ifeq ($(armthumb), on)

GYPFLAGS += -Darm_thumb=1

endif

endif

# arm_test_noprobe=on

# With this flag set, by default v8 will only use features implied

# by the compiler (no probe). This is done by modifying the default

# values of enable_armv7, enable_vfp3, enable_32dregs and enable_neon.

# Modifying these flags when launching v8 will enable the probing for

# the specified values.

ifeq ($(arm_test_noprobe), on)

GYPFLAGS += -Darm_test_noprobe=on

endif

# ----------------- available targets: --------------------

# - "builddeps": pulls in external dependencies for building

# - "dependencies": pulls in all external dependencies

# - "grokdump": rebuilds heap constants lists used by grokdump

# - any arch listed in ARCHES (see below)

# - any mode listed in MODES

# - every combination <arch>.<mode>, e.g. "ia32.release"

# - "native": current host's architecture, release mode

# - any of the above with .check appended, e.g. "ia32.release.check"

# - "android": cross-compile for Android/ARM

# - "nacl" : cross-compile for Native Client (ia32 and x64)

# - default (no target specified): build all DEFAULT_ARCHES and MODES

# - "check": build all targets and run all tests

# - "<arch>.clean" for any <arch> in ARCHES

# - "clean": clean all ARCHES

# ----------------- internal stuff ------------------------

# Architectures and modes to be compiled. Consider these to be internal

# variables, don't override them (use the targets instead).

ARCHES = ia32 x64 x32 arm arm64 mips mipsel mips64el x87

DEFAULT_ARCHES = ia32 x64 arm

MODES = release debug optdebug

DEFAULT_MODES = release debug

ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel android_x87

NACL_ARCHES = nacl_ia32 nacl_x64

# List of files that trigger Makefile regeneration:

GYPFILES = \

common.gypi \

deps/cares/cares.gyp \

deps/http_parser/http_parser.gyp \

deps/openssl/openssl.gyp \

deps/uv/uv.gyp \

deps/v8/tools/gyp/v8.gyp \

deps/zlib/zlib.gyp \

node.gyp \

# If vtunejit=on, the v8vtune.gyp will be appended.

ifeq ($(vtunejit), on)

GYPFILES += src/third_party/vtune/v8vtune.gyp

endif

# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".

BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))

ANDROID_BUILDS = $(foreach mode,$(MODES), \

$(addsuffix .$(mode),$(ANDROID_ARCHES)))

NACL_BUILDS = $(foreach mode,$(MODES), \

$(addsuffix .$(mode),$(NACL_ARCHES)))

# Generates corresponding test targets, e.g. "ia32.release.check".

CHECKS = $(addsuffix .check,$(BUILDS))

QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS))

ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS))

NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS))

# File where previously used GYPFLAGS are stored.

ENVFILE = $(OUTDIR)/environment

.PHONY: all check clean builddeps dependencies $(ENVFILE).new native \

qc quickcheck $(QUICKCHECKS) \

$(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \

$(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \

$(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \

$(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \

must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \

$(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \

must-set-NACL_SDK_ROOT

# Target definitions. "all" is the default.

all: $(DEFAULT_MODES)

# Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile

# having been created before.

buildbot:

$(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \

builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)"

# Compile targets. MODES and ARCHES are convenience targets.

.SECONDEXPANSION:

$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES))

$(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES))

# Defines how to build a particular target (e.g. ia32.release).

$(BUILDS): $(OUTDIR)/Makefile.$$@

@$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \

CXX="$(CXX)" LINK="$(LINK)" \

BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \

python -c "print \

raw_input().replace('opt', '').capitalize()") \

builddir="$(shell pwd)/$(OUTDIR)/$@"

native: $(OUTDIR)/Makefile.native

@$(MAKE) -C "$(OUTDIR)" -f Makefile.native \

CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \

builddir="$(shell pwd)/$(OUTDIR)/$@"

$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES))

$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \

must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android

@$(MAKE) -f Makefile.android $@ \

ARCH="$(basename $@)" \

MODE="$(subst .,,$(suffix $@))" \

OUTDIR="$(OUTDIR)" \

GYPFLAGS="$(GYPFLAGS)"

$(NACL_ARCHES): $(addprefix $$@.,$(MODES))

$(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \

Makefile.nacl must-set-NACL_SDK_ROOT

@$(MAKE) -f Makefile.nacl $@ \

ARCH="$(basename $@)" \

MODE="$(subst .,,$(suffix $@))" \

OUTDIR="$(OUTDIR)" \

GYPFLAGS="$(GYPFLAGS)"

# Test targets.

check: all

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \

$(TESTFLAGS)

$(addsuffix .check,$(MODES)): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--mode=$(basename $@) $(TESTFLAGS)

$(addsuffix .check,$(ARCHES)): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch=$(basename $@) $(TESTFLAGS)

$(CHECKS): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(basename $@) $(TESTFLAGS)

$(addsuffix .quickcheck,$(MODES)): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--mode=$(basename $@) $(TESTFLAGS) --quickcheck

$(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch=$(basename $@) $(TESTFLAGS) --quickcheck

$(QUICKCHECKS): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck

$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@)

@tools/android-sync.sh $(basename $@) $(OUTDIR) \

$(shell pwd) $(ANDROID_V8)

$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(basename $@) \

--timeout=600 \

--command-prefix="tools/android-run.py" $(TESTFLAGS)

$(addsuffix .check, $(ANDROID_ARCHES)): \

$(addprefix $$(basename $$@).,$(MODES)).check

$(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@)

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(basename $@) \

--timeout=600 --nopresubmit --noi18n \

--command-prefix="tools/nacl-run.py"

$(addsuffix .check, $(NACL_ARCHES)): \

$(addprefix $$(basename $$@).,$(MODES)).check

native.check: native

@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \

--arch-and-mode=. $(TESTFLAGS)

SUPERFASTTESTMODES = ia32.release

FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release

FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug

COMMA = ,

EMPTY =

SPACE = $(EMPTY) $(EMPTY)

quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES))

tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \

--download-data mozilla webkit

tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \

--arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck

qc: quickcheck

# Clean targets. You can clean each architecture individually, or everything.

$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)):

rm -f $(OUTDIR)/Makefile.$(basename $@)*

rm -rf $(OUTDIR)/$(basename $@).release

rm -rf $(OUTDIR)/$(basename $@).debug

rm -rf $(OUTDIR)/$(basename $@).optdebug

find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete

native.clean:

rm -f $(OUTDIR)/Makefile.native

rm -rf $(OUTDIR)/native

find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete

clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean gtags.clean

# GYP file generation targets.

OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS))

$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE)

$(eval CXX_TARGET_ARCH:=$(shell $(CXX) -v 2>&1 | grep ^Target: | \

cut -f 2 -d " " | cut -f 1 -d "-" ))

$(eval CXX_TARGET_ARCH:=$(subst aarch64,arm64,$(CXX_TARGET_ARCH)))

$(eval V8_TARGET_ARCH:=$(subst .,,$(suffix $(basename $@))))

GYP_GENERATORS=make \

tools/gyp/gyp --generator-output="$(OUTDIR)" node.gyp \

-Icommon.gypi --depth=. \

-Dtarget_arch=$(V8_TARGET_ARCH) \

-Dv8_target_arch=$(V8_TARGET_ARCH) \

$(if $(findstring $(CXX_TARGET_ARCH),$(V8_TARGET_ARCH)), \

-Dtarget_arch=$(V8_TARGET_ARCH),) \

$(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \

-S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS)

$(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE)

GYP_GENERATORS=make \

tools/gyp/gyp --generator-output="$(OUTDIR)" node.gyp \

-Icommon.gypi --depth=. -S.native $(GYPFLAGS)

must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN:

ifndef ANDROID_NDK_ROOT

ifndef ANDROID_TOOLCHAIN

$(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set))

endif

endif

# Note that NACL_SDK_ROOT must be set to point to an appropriate

# Native Client SDK before using this makefile. You can download

# an SDK here:

# https://developers.google.com/native-client/sdk/download

# The path indicated by NACL_SDK_ROOT will typically end with

# a folder for a pepper version such as "pepper_25" that should

# have "tools" and "toolchain" subdirectories.

must-set-NACL_SDK_ROOT:

ifndef NACL_SDK_ROOT

$(error NACL_SDK_ROOT must be set)

endif

# Replaces the old with the new environment file if they're different, which

# will trigger GYP to regenerate Makefiles.

$(ENVFILE): $(ENVFILE).new

@if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \

then rm $(ENVFILE).new; \

else mv $(ENVFILE).new $(ENVFILE); fi

# Stores current GYPFLAGS in a file.

$(ENVFILE).new:

@mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \

echo "CXX=$(CXX)" >> $(ENVFILE).new

# Heap constants for grokdump.

DUMP_FILE = tools/v8heapconst.py

grokdump: ia32.release

@cat $(DUMP_FILE).tmpl > $(DUMP_FILE)

@$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE)

# Support for the GNU GLOBAL Source Code Tag System.

gtags.files: $(GYPFILES) $(ENVFILE)

@find include src test -name '*.h' -o -name '*.cc' -o -name '*.c' > $@

# We need to manually set the stack limit here, to work around bugs in

# gmake-3.81 and global-5.7.1 on recent 64-bit Linux systems.

GPATH GRTAGS GSYMS GTAGS: gtags.files $(shell cat gtags.files 2> /dev/null)

@bash -c 'ulimit -s 10240 && GTAGSFORCECPP=yes gtags -i -q -f $<'

gtags.clean:

rm -f gtags.files GPATH GRTAGS GSYMS GTAGS

# Dependencies. "builddeps" are dependencies required solely for building,

# "dependencies" includes also dependencies required for development.

# Remember to keep these in sync with the DEPS file.

builddeps:

svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \

--revision 1831

if svn info third_party/icu 2>&1 | grep -q icu46 ; then \

svn switch --force \

https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \

third_party/icu --revision 277999 ; \

else \

svn checkout --force \

https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \

third_party/icu --revision 277999 ; \

fi

svn checkout --force http://googletest.googlecode.com/svn/trunk \

testing/gtest --revision 692

svn checkout --force http://googlemock.googlecode.com/svn/trunk \

testing/gmock --revision 485

dependencies: builddeps

# The spec is a copy of the hooks in v8's DEPS file.

gclient sync -r fb782d4369d5ae04f17a2fceef7de5a63e50f07b --spec="solutions = [{u'managed': False, u'name': u'buildtools', u'url': u'https://chromium.googlesource.com/chromium/buildtools.git', u'custom_deps': {}, u'custom_hooks': [{u'name': u'clang_format_win',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=win32',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/win/clang-format.exe.sha1']},{u'name': u'clang_format_mac',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=darwin',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/mac/clang-format.sha1']},{u'name': u'clang_format_linux',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=linux*',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/linux64/clang-format.sha1']}],u'deps_file': u'.DEPS.git', u'safesync_url': u''}]"