TRANSFORMS REFACTORING

The primary goal of this refactoring was to make it easier to

extend matplotlib to support new kinds of projections. This is

primarily an internal improvement, and the possible user-visible

changes it allows are yet to come.

See transforms.py for a description of the design of the new

transformation framework.

The view intervals are now stored only in one place -- in the Axes

instance, not in the formatter instances as well. This means

formatters must get their limits from their Axis, which in turn

looks up its limits from the Axes. If a Locator is used

temporarily and not assigned to an Axis or Axes, (e.g. in

contour.py), a dummy axis must be created to store its bounds.

Call Locator.create_dummy_axis() to do so.

The functionality of Pbox has been merged with Bbox. Its methods

now all return copies rather than modifying in place.

The following lists many of the simple changes necessary to update

code from the old transformation framework to the new one. In

particular, methods that return a copy are named with a verb in

the past tense, whereas methods that alter an object in place are

named with a very in the present tense.

transforms.py

Bbox.get_bounds() Bbox.bounds

Bbox.width() Bbox.width

Bbox.height() Bbox.height

Bbox.intervalx().get_bounds() Bbox.intervalx

Bbox.intervalx().set_bounds()

[Bbox.intervalx is now a property.]

Bbox.intervaly().get_bounds() Bbox.intervaly

Bbox.intervaly().set_bounds()

[Bbox.intervaly is now a property.]

Bbox.xmin() Bbox.x0 or Bbox.xmin

Bbox.ymin() Bbox.y0 or Bbox.ymin

Bbox.xmax() Bbox.x1 or Bbox.xmax

Bbox.ymax() Bbox.y1 or Bbox.ymax

[The Bbox is bound by the points (x0, y0) to (x1, y1) and

there is no defined order to these points, that is, x0 is not

necessarily the left edge of the box. To get the left edge of

the Bbox, use the read-only property xmin.]

Bbox.overlaps(bboxes) Bbox.count_overlaps(bboxes)

bbox_all(bboxes) Bbox.union(bboxes)

[Bbox.union is a staticmethod.]

lbwh_to_bbox(l, b, w, h) Bbox.from_bounds(x0, y0, w, h)

inverse_transform_bbox(trans, bbox) bbox.inverse_transformed(trans)

Interval.contains_open(v) interval_contains_open(tuple, v)

Interval.contains(v) interval_contains_open(tuple, v)

identity_transform() IdentityTransform()

blend_xy_sep_transform(xtrans, ytrans) blended_transform_factory(xtrans, ytrans)

scale_transform(xs, ys) Affine2D().scale(xs[, ys])

get_bbox_transform(boxin, boxout) BboxTransform(boxin, boxout) or

BboxTransformFrom(boxin) or

BboxTransformTo(boxout)

Transform.seq_xy_tup(points) Transform.transform(points)

Transform.inverse_xy_tup(points) Transform.inverted().transform(points)

axes.py

Axes.get_position() Axes.get_position()

[Axes.get_position() used to return a list of points, not it

returns a transforms.Bbox instance.]

Axes.set_position() Axes.set_position()

[Axes.set_position() now accepts either four scalars or a

transforms Bbox instance.]

[also returns a Bbox]

Axes.toggle_log_lineary() Axes.set_yscale()

[Since the recfactoring allows for more than two scale types

('log' or 'linear'), it no longer makes sense to have a

toggle. Axes.toggle_log_lineary() has been removed.]

Axes.hlines(linestyle=) Axes.hlines(linestyles=)

Axes.vlines(linestyle=) Axes.vlines(linestyles=)

[The kwarg 'linestyle' has been replaced with 'linestyles',

which accepts either a single linestyle or a list of

linestyles to use.]

Subplot class is gone -- now there is only SubplotBase.

The Polar class has moved to projections/polar.py

artist.py

Artist.set_clip_path(path) Artist.set_clip_path(path, transform)

[set_clip_path now accepts a path.Path instance and a

transformation that will be applied to the path immediately

before clipping.]

collections.py

linestyle linestyles

[Linestyles are now treated like all other collection

attributes -- a single value or multiple values may be

provided.]

colors.py

ColorConvertor.to_rgba_list(c) ColorConvertor.to_rgba_array(c)

[ColorConvertor.to_rgba_array(c) returns an Nx4 Numpy array of

RGBA color quadruples.]

contour.py

Contour._segments Contour.get_paths()

[Contour.get_paths() now returns a list of path.Path instances.]

figure.py

Figure.dpi.get()/set() Figure.dpi (a property)

patches.py

get_verts() get_path()

[Patch.get_path() returns a path.Path instance.]

backend_bases.py

GraphicsContext.set_clip_rectangle(tuple) GraphicsContext.set_clip_rectangle(bbox)

GraphicsContext.get_clip_path() GraphicsContext.get_clip_path()

[GraphicsContext.get_clip_path() returns a tuple of the form

(path, affine_transform), where path is a path.Path instance

and affine_transform is a transforms.Affine2D instance.]

GraphicsContext.set_clip_path(clippath) GraphicsContext.set_clip_path(clippath)

[Now accepts only an instance of transforms.TransformedPath.]

RendererBase class:

**new methods** --->

draw_path(self, gc, path, transform, rgbFace)

draw_markers(self, gc, marker_path, marker_trans, path, trans, rgbFace)

draw_path_collection(self, master_transform, cliprect, clippath,

clippath_trans, paths, all_transforms, offsets,

offsetTrans, facecolors, edgecolors, linewidths,

linestyles, antialiaseds) [optional]

**changed methods** --->

draw_image(self, x, y, im, bbox) draw_image(self, x, y, im, bbox,

clippath, clippath_trans)

**removed methods** --->

draw_arc

draw_line_collection

draw_line

draw_lines

draw_point

draw_quad_mesh

draw_poly_collection

draw_polygon

draw_rectangle

draw_regpoly_collection

END OF TRANSFORMS REFACTORING

0.91.1 Released

0.91.0 Released

Changed cbook.is_file_like to cbook.is_writable_file_like and

corrected behavior.

Moved mlab.csv2rec -> recutils.csv2rec

Added ax kwarg to pyplot.colorbar and Figure.colorbar so that

one can specify the axes object from which space for the colorbar

is to be taken, if one does not want to make the colorbar axes

manually.

Changed cbook.reversed so it yields a tuple rather than a

(index, tuple). This agrees with the python reversed builtin,

and cbook only defines reversed if python doesnt provide the

builtin.

Made skiprows=1 the default on csv2rec

The gd and paint backends have been deleted.

The errorbar method and function now accept additional kwargs

so that upper and lower limits can be indicated by capping the

bar with a caret instead of a straight line segment.

The dviread.py file now has a parser for files like psfonts.map

and pdftex.map, to map TeX font names to external files.

The file type1font.py contains a new class for Type 1 fonts.

Currently it simply reads pfa and pfb format files and stores the

data in a way that is suitable for embedding in pdf files. In the

future the class might actually parse the font to allow e.g.

subsetting.

FT2Font now supports FT_Attach_File. In practice this can be used

to read an afm file in addition to a pfa/pfb file, to get metrics

and kerning information for a Type 1 font.

The AFM class now supports querying CapHeight and stem widths. The

get_name_char method now has an isord kwarg like get_width_char.

Changed pcolor default to shading='flat'; but as noted now in the

docstring, it is preferable to simply use the edgecolor kwarg.

The mathtext font commands (\cal, \rm, \it, \tt) now behave as TeX

does: they are in effect until the next font change command or the

end of the grouping. Therefore uses of $\cal{R}$ should be

changed to ${\cal R}$. Alternatively, you may use the new

LaTeX-style font commands (\mathcal, \mathrm, \mathit, \mathtt)

which do affect the following group, eg. $\mathcal{R}$.

Text creation commands have a new default linespacing and

a new linespacing kwarg, which is a multiple of the maximum

vertical extent of a line of ordinary text. The default is

1.2; linespacing=2 would be like ordinary double spacing, for

example.

Changed default kwarg in colors.Normalize.__init__ to clip=False;

clipping silently defeats the purpose of the special over, under,

and bad values in the colormap, thereby leading to unexpected

behavior. The new default should reduce such surprises.

Made the emit property of set_xlim and set_ylim true by default;

removed the Axes custom callback handling into a 'callbacks'

attribute which is a cbook.CallbackRegistry instance. This now

supports the xlim_changed and ylim_changed Axes events.

0.90.1 released

The file dviread.py has a (very limited and fragile) dvi reader

for usetex support. The API might change in the future so don't

depend on it yet.

Removed deprecated support for a float value as a gray-scale;

now it must be a string, like '0.5'. Added alpha kwarg to

ColorConverter.to_rgba_list.

New method set_bounds(vmin, vmax) for formatters, locators sets

the viewInterval and dataInterval from floats.

Removed deprecated colorbar_classic.

Line2D.get_xdata and get_ydata valid_only=False kwarg is replaced

by orig=True. When True, it returns the original data, otherwise

the processed data (masked, converted)

Some modifications to the units interface.

units.ConversionInterface.tickers renamed to

units.ConversionInterface.axisinfo and it now returns a

units.AxisInfo object rather than a tuple. This will make it

easier to add axis info functionality (eg I added a default label

on this iteration) w/o having to change the tuple length and hence

the API of the client code everytime new functionality is added.

Also, units.ConversionInterface.convert_to_value is now simply

named units.ConversionInterface.convert.

Axes.errorbar uses Axes.vlines and Axes.hlines to draw its error

limits int he vertical and horizontal direction. As you'll see

in the changes below, these funcs now return a LineCollection

rather than a list of lines. The new return signature for

errorbar is ylins, caplines, errorcollections where

errorcollections is a xerrcollection, yerrcollection

Axes.vlines and Axes.hlines now create and returns a LineCollection, not a list

of lines. This is much faster. The kwarg signature has changed,

so consult the docs

MaxNLocator accepts a new Boolean kwarg ('integer') to force

ticks to integer locations.

Commands that pass an argument to the Text constructor or to

Text.set_text() now accept any object that can be converted

with '%s'. This affects xlabel(), title(), etc.

Barh now takes a **kwargs dict instead of most of the old

arguments. This helps ensure that bar and barh are kept in sync,

but as a side effect you can no longer pass e.g. color as a

positional argument.

ft2font.get_charmap() now returns a dict that maps character codes

to glyph indices (until now it was reversed)

Moved data files into lib/matplotlib so that setuptools' develop

mode works. Re-organized the mpl-data layout so that this source

structure is maintained in the installation. (I.e. the 'fonts' and

'images' sub-directories are maintained in site-packages.).

Suggest removing site-packages/matplotlib/mpl-data and

~/.matplotlib/ttffont.cache before installing

0.90.0 released

All artists now implement a "pick" method which users should not

call. Rather, set the "picker" property of any artist you want to

pick on (the epsilon distance in points for a hit test) and

register with the "pick_event" callback. See

examples/pick_event_demo.py for details

Bar, barh, and hist have "log" binary kwarg: log=True

sets the ordinate to a log scale.

Boxplot can handle a list of vectors instead of just

an array, so vectors can have different lengths.

Plot can handle 2-D x and/or y; it plots the columns.

Added linewidth kwarg to bar and barh.

Made the default Artist._transform None (rather than invoking

identity_transform for each artist only to have it overridden

later). Use artist.get_transform() rather than artist._transform,

even in derived classes, so that the default transform will be

created lazily as needed

New LogNorm subclass of Normalize added to colors.py.

All Normalize subclasses have new inverse() method, and

the __call__() method has a new clip kwarg.

Changed class names in colors.py to match convention:

normalize -> Normalize, no_norm -> NoNorm. Old names

are still available for now.

Removed obsolete pcolor_classic command and method.

Removed lineprops and markerprops from the Annotation code and

replaced them with an arrow configurable with kwarg arrowprops.

See examples/annotation_demo.py - JDH

0.87.7 released

Completely reworked the annotations API because I found the old

API cumbersome. The new design is much more legible and easy to

read. See matplotlib.text.Annotation and

examples/annotation_demo.py

markeredgecolor and markerfacecolor cannot be configured in

matplotlibrc any more. Instead, markers are generally colored

automatically based on the color of the line, unless marker colors

are explicitely set as kwargs - NN

Changed default comment character for load to '#' - JDH

math_parse_s_ft2font_svg from mathtext.py & mathtext2.py now returns

width, height, svg_elements. svg_elements is an instance of Bunch (

cmbook.py) and has the attributes svg_glyphs and svg_lines, which are both

lists.

Renderer.draw_arc now takes an additional parameter, rotation.

It specifies to draw the artist rotated in degrees anti-

clockwise. It was added for rotated ellipses.

Renamed Figure.set_figsize_inches to Figure.set_size_inches to

better match the get method, Figure.get_size_inches.

Removed the copy_bbox_transform from transforms.py; added

shallowcopy methods to all transforms. All transforms already

had deepcopy methods.

FigureManager.resize(width, height): resize the window

specified in pixels

barh: x and y args have been renamed to width and bottom

respectively, and their order has been swapped to maintain

a (position, value) order.

bar and barh: now accept kwarg 'edgecolor'.

bar and barh: The left, height, width and bottom args can

now all be scalars or sequences; see docstring.

barh: now defaults to edge aligned instead of center

aligned bars

bar, barh and hist: Added a keyword arg 'align' that

controls between edge or center bar alignment.

Collections: PolyCollection and LineCollection now accept

vertices or segments either in the original form [(x,y),

(x,y), ...] or as a 2D numerix array, with X as the first column

and Y as the second. Contour and quiver output the numerix

form. The transforms methods Bbox.update() and

Transformation.seq_xy_tups() now accept either form.

Collections: LineCollection is now a ScalarMappable like

PolyCollection, etc.

Specifying a grayscale color as a float is deprecated; use

a string instead, e.g., 0.75 -> '0.75'.

Collections: initializers now accept any mpl color arg, or

sequence of such args; previously only a sequence of rgba

tuples was accepted.

Colorbar: completely new version and api; see docstring. The

original version is still accessible as colorbar_classic, but

is deprecated.

Contourf: "extend" kwarg replaces "clip_ends"; see docstring.

Masked array support added to pcolormesh.

Modified aspect-ratio handling:

Removed aspect kwarg from imshow

Axes methods:

set_aspect(self, aspect, adjustable=None, anchor=None)

set_adjustable(self, adjustable)

set_anchor(self, anchor)

Pylab interface:

axis('image')

Backend developers: ft2font's load_char now takes a flags

argument, which you can OR together from the LOAD_XXX

constants.

API Changes in matplotlib-0.86

Matplotlib data is installed into the matplotlib module.

This is similar to package_data. This should get rid of

having to check for many possibilities in _get_data_path().

The MATPLOTLIBDATA env key is still checked first to allow

for flexibility.

1) Separated the color table data from cm.py out into

a new file, _cm.py, to make it easier to find the actual

code in cm.py and to add new colormaps. Everything

from _cm.py is imported by cm.py, so the split should be

transparent.

2) Enabled automatic generation of a colormap from

a list of colors in contour; see modified

examples/contour_demo.py.

3) Support for imshow of a masked array, with the

ability to specify colors (or no color at all) for

masked regions, and for regions that are above or

below the normally mapped region. See

examples/image_masked.py.

4) In support of the above, added two new classes,

ListedColormap, and no_norm, to colors.py, and modified

the Colormap class to include common functionality. Added

a clip kwarg to the normalize class.

API Changes in matplotlib-0.85

Made xtick and ytick separate props in rc

made pos=None the default for tick formatters rather than 0 to

indicate "not supplied"

Removed "feature" of minor ticks which prevents them from

overlapping major ticks. Often you want major and minor ticks at

the same place, and can offset the major ticks with the pad. This

could be made configurable

Changed the internal structure of contour.py to a more OO style.

Calls to contour or contourf in axes.py or pylab.py now return

a ContourSet object which contains references to the

LineCollections or PolyCollections created by the call,

as well as the configuration variables that were used.

The ContourSet object is a "mappable" if a colormap was used.

Added a clip_ends kwarg to contourf. From the docstring:

* clip_ends = True

If False, the limits for color scaling are set to the

minimum and maximum contour levels.

True (default) clips the scaling limits. Example:

if the contour boundaries are V = [-100, 2, 1, 0, 1, 2, 100],

then the scaling limits will be [-100, 100] if clip_ends

is False, and [-3, 3] if clip_ends is True.

Added kwargs linewidths, antialiased, and nchunk to contourf. These

are experimental; see the docstring.

Changed Figure.colorbar():

kw argument order changed;

if mappable arg is a non-filled ContourSet, colorbar() shows

lines instead hof polygons.

if mappable arg is a filled ContourSet with clip_ends=True,

the endpoints are not labelled, so as to give the

correct impression of open-endedness.

Changed LineCollection.get_linewidths to get_linewidth, for

consistency.

API Changes in matplotlib-0.84

Unified argument handling between hlines and vlines. Both now

take optionally a fmt argument (as in plot) and a keyword args

that can be passed onto Line2D.

Removed all references to "data clipping" in rc and lines.py since

these were not used and not optimized. I'm sure they'll be

resurrected later with a better implementation when needed.

'set' removed - no more deprecation warnings. Use 'setp' instead.

Backend developers: Added flipud method to image and removed it

from to_str. Removed origin kwarg from backend.draw_image.

origin is handled entirely by the frontend now.

API Changes in matplotlib-0.83

- Made HOME/.matplotlib the new config dir where the matplotlibrc

file, the ttf.cache, and the tex.cache live. The new default

filenames in .matplotlib have no leading dot and are not hidden.

Eg, the new names are matplotlibrc, tex.cache, and ttffont.cache.

This is how ipython does it so it must be right.

If old files are found, a warning is issued and they are moved to

the new location.

- backends/__init__.py no longer imports new_figure_manager,

draw_if_interactive and show from the default backend, but puts

these imports into a call to pylab_setup. Also, the Toolbar is no

longer imported from WX/WXAgg. New usage:

from backends import pylab_setup

new_figure_manager, draw_if_interactive, show = pylab_setup()

- Moved Figure.get_width_height() to FigureCanvasBase. It now

returns int instead of float.

API Changes in matplotlib-0.82

- toolbar import change in GTKAgg, GTKCairo and WXAgg

- Added subplot config tool to GTK* backends -- note you must now

import the NavigationToolbar2 from your backend of choice rather

than from backend_gtk because it needs to know about the backend

specific canvas -- see examples/embedding_in_gtk2.py. Ditto for

wx backend -- see examples/embedding_in_wxagg.py

- hist bin change

Sean Richards notes there was a problem in the way we created

the binning for histogram, which made the last bin

underrepresented. From his post:

I see that hist uses the linspace function to create the bins

and then uses searchsorted to put the values in their correct

bin. Thats all good but I am confused over the use of linspace

for the bin creation. I wouldn't have thought that it does

what is needed, to quote the docstring it creates a "Linear

spaced array from min to max". For it to work correctly

shouldn't the values in the bins array be the same bound for

each bin? (i.e. each value should be the lower bound of a

bin). To provide the correct bins for hist would it not be

something like

def bins(xmin, xmax, N):

if N==1: return xmax

dx = (xmax-xmin)/N # instead of N-1

return xmin + dx*arange(N)

This suggestion is implemented in 0.81. My test script with these

changes does not reveal any bias in the binning

from matplotlib.numerix.mlab import randn, rand, zeros, Float

from matplotlib.mlab import hist, mean

Nbins = 50

Ntests = 200

results = zeros((Ntests,Nbins), typecode=Float)

for i in range(Ntests):

print 'computing', i

x = rand(10000)

n, bins = hist(x, Nbins)

results[i] = n

print mean(results)

API CHANGES in matplotlib-0.81

- pylab and artist "set" functions renamed to setp to avoid clash

with python2.4 built-in set. Current version will issue a

deprecation warning which will be removed in future versions

- imshow interpolation arguments changes for advanced interpolation

schemes. See help imshow, particularly the interpolation,

filternorm and filterrad kwargs

- Support for masked arrays has been added to the plot command and

to the Line2D object. Only the valid points are plotted. A

"valid_only" kwarg was added to the get_xdata() and get_ydata()

methods of Line2D; by default it is False, so that the original

data arrays are returned. Setting it to True returns the plottable

points.

- contour changes:

Masked arrays: contour and contourf now accept masked arrays as

the variable to be contoured. Masking works correctly for

contour, but a bug remains to be fixed before it will work for

contourf. The "badmask" kwarg has been removed from both

functions.

Level argument changes:

Old version: a list of levels as one of the positional

arguments specified the lower bound of each filled region; the

upper bound of the last region was taken as a very large

number. Hence, it was not possible to specify that z values

between 0 and 1, for example, be filled, and that values

outside that range remain unfilled.

New version: a list of N levels is taken as specifying the

boundaries of N-1 z ranges. Now the user has more control over

what is colored and what is not. Repeated calls to contourf

(with different colormaps or color specifications, for example)

can be used to color different ranges of z. Values of z

outside an expected range are left uncolored.

Example:

Old: contourf(z, [0, 1, 2]) would yield 3 regions: 0-1, 1-2, and >2.

New: it would yield 2 regions: 0-1, 1-2. If the same 3 regions were

desired, the equivalent list of levels would be [0, 1, 2,

1e38].

API CHANGES in matplotlib-0.80

- xlim/ylim/axis always return the new limits regardless of

arguments. They now take kwargs which allow you to selectively

change the upper or lower limits while leaving unnamed limits

unchanged. See help(xlim) for example

API CHANGES in matplotlib-0.73

- Removed deprecated ColormapJet and friends

- Removed all error handling from the verbose object

- figure num of zero is now allowed

API CHANGES in matplotlib-0.72

- Line2D, Text, and Patch copy_properties renamed update_from and

moved into artist base class

- LineCollecitons.color renamed to LineCollections.set_color for

consistency with set/get introspection mechanism,

- pylab figure now defaults to num=None, which creates a new figure

with a guaranteed unique number

- contour method syntax changed - now it is matlab compatible

unchanged: contour(Z)

old: contour(Z, x=Y, y=Y)

new: contour(X, Y, Z)

see http://matplotlib.sf.net/matplotlib.pylab.html#-contour

- Increased the default resolution for save command.

- Renamed the base attribute of the ticker classes to _base to avoid conflict

with the base method. Sitt for subs

- subs=none now does autosubbing in the tick locator.

- New subplots that overlap old will delete the old axes. If you

do not want this behavior, use fig.add_subplot or the axes

command

API CHANGES in matplotlib-0.71

Significant numerix namespace changes, introduced to resolve

namespace clashes between python built-ins and mlab names.

Refactored numerix to maintain separate modules, rather than

folding all these names into a single namespace. See the following

mailing list threads for more information and background

http://sourceforge.net/mailarchive/forum.php?thread_id=6398890&forum_id=36187

http://sourceforge.net/mailarchive/forum.php?thread_id=6323208&forum_id=36187

OLD usage

from matplotlib.numerix import array, mean, fft

NEW usage

from matplotlib.numerix import array

from matplotlib.numerix.mlab import mean

from matplotlib.numerix.fft import fft

numerix dir structure mirrors numarray (though it is an incomplete

implementation)

numerix

numerix/mlab

numerix/linear_algebra

numerix/fft

numerix/random_array

but of course you can use 'numerix : Numeric' and still get the

symbols.

pylab still imports most of the symbols from Numerix, MLab, fft,

etc, but is more cautious. For names that clash with python names

(min, max, sum), pylab keeps the builtins and provides the numeric

versions with an a* prefix, eg (amin, amax, asum)

API CHANGES in matplotlib-0.70

MplEvent factored into a base class Event and derived classes

MouseEvent and KeyEvent

Removed definct set_measurement in wx toolbar

API CHANGES in matplotlib-0.65.1

removed add_axes and add_subplot from backend_bases. Use

figure.add_axes and add_subplot instead. The figure now manages the

current axes with gca and sca for get and set current axe. If you

have code you are porting which called, eg, figmanager.add_axes, you

can now simply do figmanager.canvas.figure.add_axes.

API CHANGES in matplotlib-0.65

mpl_connect and mpl_disconnect in the matlab interface renamed to

connect and disconnect

Did away with the text methods for angle since they were ambiguous.

fontangle could mean fontstyle (obligue, etc) or the rotation of the

text. Use style and rotation instead.

API CHANGES in matplotlib-0.63

Dates are now represented internally as float days since 0001-01-01,

UTC.

All date tickers and formatters are now in matplotlib.dates, rather

than matplotlib.tickers

converters have been abolished from all functions and classes.

num2date and date2num are now the converter functions for all date

plots

Most of the date tick locators have a different meaning in their

constructors. In the prior implementation, the first argument was a

base and multiples of the base were ticked. Eg

HourLocator(5) # old: tick every 5 minutes

In the new implementation, the explicit points you want to tick are

provided as a number or sequence

HourLocator(range(0,5,61)) # new: tick every 5 minutes

This gives much greater flexibility. I have tried to make the

default constructors (no args) behave similarly, where possible.

Note that YearLocator still works under the base/multiple scheme.

The difference between the YearLocator and the other locators is

that years are not recurrent.

Financial functions:

matplotlib.finance.quotes_historical_yahoo(ticker, date1, date2)

date1, date2 are now datetime instances. Return value is a list

of quotes where the quote time is a float - days since gregorian

start, as returned by date2num

See examples/finance_demo.py for example usage of new API

API CHANGES in matplotlib-0.61

canvas.connect is now deprecated for event handling. use

mpl_connect and mpl_disconnect instead. The callback signature is

func(event) rather than func(widget, evet)

API CHANGES in matplotlib-0.60

ColormapJet and Grayscale are deprecated. For backwards

compatibility, they can be obtained either by doing

from matplotlib.cm import ColormapJet

or

from matplotlib.matlab import *

They are replaced by cm.jet and cm.grey

API CHANGES in matplotlib-0.54.3

removed the set_default_font / get_default_font scheme from the

font_manager to unify customization of font defaults with the rest of

the rc scheme. See examples/font_properties_demo.py and help(rc) in

matplotlib.matlab.

API CHANGES in matplotlib-0.54

matlab interface

================

dpi

---

Several of the backends used a PIXELS_PER_INCH hack that I added to

try and make images render consistently across backends. This just

complicated matters. So you may find that some font sizes and line

widths appear different than before. Apologies for the

inconvenience. You should set the dpi to an accurate value for your

screen to get true sizes.

pcolor and scatter

------------------

There are two changes to the matlab interface API, both involving the

patch drawing commands. For efficiency, pcolor and scatter have been

rewritten to use polygon collections, which are a new set of objects

from matplotlib.collections designed to enable efficient handling of

large collections of objects. These new collections make it possible

to build large scatter plots or pcolor plots with no loops at the

python level, and are significantly faster than their predecessors.

The original pcolor and scatter functions are retained as

pcolor_classic and scatter_classic.

The return value from pcolor is a PolyCollection. Most of the

propertes that are available on rectangles or other patches are also

available on PolyCollections, eg you can say

c = scatter(blah, blah)

c.set_linewidth(1.0)

c.set_facecolor('r')

c.set_alpha(0.5)

or

c = scatter(blah, blah)

set(c, 'linewidth', 1.0, 'facecolor', 'r', 'alpha', 0.5)

Because the collection is a single object, you no longer need to loop

over the return value of scatter or pcolor to set properties for the

entire list.

If you want the different elements of a collection to vary on a

property, eg to have different line widths, see matplotlib.collections

for a discussion on how to set the properties as a sequence.

For scatter, the size argument is now in points^2 (the area of the

symbol in points) as in matlab and is not in data coords as before.

Using sizes in data coords caused several problems. So you will need

to adjust your size arguments accordingly or use scatter_classic.

mathtext spacing

----------------

For reasons not clear to me (and which I'll eventually fix) spacing no

longer works in font groups. However, I added three new spacing

commands which compensate for this '\ ' (regular space), '\/' (small

space) and '\hspace{frac}' where frac is a fraction of fontsize in

points. You will need to quote spaces in font strings, is

title(r'$\rm{Histogram\ of\ IQ:}\ \mu=100,\ \sigma=15$')

Object interface - Application programmers

==========================================

Autoscaling

------------

The x and y axis instances no longer have autoscale view. These are

handled by axes.autoscale_view

Axes creation

--------------

You should not instantiate your own Axes any more using the OO API.

Rather, create a Figure as before and in place of

f = Figure(figsize=(5,4), dpi=100)

a = Subplot(f, 111)

f.add_axis(a)

use

f = Figure(figsize=(5,4), dpi=100)

a = f.add_subplot(111)

That is, add_axis no longer exists and is replaced by

add_axes(rect, axisbg=defaultcolor, frameon=True)

add_subplot(num, axisbg=defaultcolor, frameon=True)

Artist methods

---------------

If you define your own Artists, you need to rename the _draw method

to draw

Bounding boxes

--------------

matplotlib.transforms.Bound2D is replaced by

matplotlib.transforms.Bbox. If you want to construct a bbox from

left, bottom, width, height (the signature for Bound2D), use

matplotlib.transforms.lbwh_to_bbox, as in

bbox = clickBBox = lbwh_to_bbox(left, bottom, width, height)

The Bbox has a different API than the Bound2D. Eg, if you want to

get the width and height of the bbox

OLD

width = fig.bbox.x.interval()

height = fig.bbox.y.interval()

New

width = fig.bbox.width()

height = fig.bbox.height()

Object constructors

-------------------

You no longer pass the bbox, dpi, or transforms to the various

Artist constructors. The old way or creating lines and rectangles

was cumbersome because you had to pass so many attributes to the

Line2D and Rectangle classes not related directly to the gemoetry

and properties of the object. Now default values are added to the

object when you call axes.add_line or axes.add_patch, so they are

hidden from the user.

If you want to define a custom transformation on these objects, call

o.set_transform(trans) where trans is a Transformation instance.

In prior versions of you wanted to add a custom line in data coords,

you would have to do

l = Line2D(dpi, bbox, x, y,

color = color,

transx = transx,

transy = transy,

)

now all you need is

l = Line2D(x, y, color=color)

and the axes will set the transformation for you (unless you have

set your own already, in which case it will eave it unchanged)

Transformations

---------------

The entire transformation architecture has been rewritten.

Previously the x and y transformations where stored in the xaxis and

yaxis insstances. The problem with this approach is it only allows

for separable transforms (where the x and y transformations don't

depend on one another). But for cases like polar, they do. Now

transformations operate on x,y together. There is a new base class

matplotlib.transforms.Transformation and two concrete

implemetations, matplotlib.transforms.SeparableTransformation and

matplotlib.transforms.Affine. The SeparableTransformation is

constructed with the bounding box of the input (this determines the

rectangular coordinate system of the input, ie the x and y view

limits), the bounding box of the display, and possibily nonlinear

transformations of x and y. The 2 most frequently used

transformations, data cordinates -> display and axes coordinates ->

display are available as ax.transData and ax.transAxes. See

alignment_demo.py which uses axes coords.

Also, the transformations should be much faster now, for two reasons

* they are written entirely in extension code

* because they operate on x and y together, they can do the entire

transformation in one loop. Earlier I did something along the

lines of