iframe-proxy | Sunbelt Computer Software

361 lines (296 loc) · 14.4 KB
# coding=utf-8
# Copyright 2025 The HuggingFace Inc. team.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#     http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""PyTorch optimization for diffusion models."""
import math
from enum import Enum
from typing import Optional, Union
from torch.optim import Optimizer
from torch.optim.lr_scheduler import LambdaLR
from .utils import logging
logger = logging.get_logger(__name__)
class SchedulerType(Enum):
    LINEAR = "linear"
    COSINE = "cosine"
    COSINE_WITH_RESTARTS = "cosine_with_restarts"
    POLYNOMIAL = "polynomial"
    CONSTANT = "constant"
    CONSTANT_WITH_WARMUP = "constant_with_warmup"
    PIECEWISE_CONSTANT = "piecewise_constant"
def get_constant_schedule(optimizer: Optimizer, last_epoch: int = -1) -> LambdaLR:
    Create a schedule with a constant learning rate, using the learning rate set in optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    return LambdaLR(optimizer, lambda _: 1, last_epoch=last_epoch)
def get_constant_schedule_with_warmup(optimizer: Optimizer, num_warmup_steps: int, last_epoch: int = -1) -> LambdaLR:
    Create a schedule with a constant learning rate preceded by a warmup period during which the learning rate
    increases linearly between 0 and the initial lr set in the optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        num_warmup_steps (`int`):
            The number of steps for the warmup phase.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    def lr_lambda(current_step: int):
        if current_step < num_warmup_steps:
            return float(current_step) / float(max(1.0, num_warmup_steps))
        return 1.0
    return LambdaLR(optimizer, lr_lambda, last_epoch=last_epoch)
def get_piecewise_constant_schedule(optimizer: Optimizer, step_rules: str, last_epoch: int = -1) -> LambdaLR:
    Create a schedule with a constant learning rate, using the learning rate set in optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        step_rules (`string`):
            The rules for the learning rate. ex: rule_steps="1:10,0.1:20,0.01:30,0.005" it means that the learning rate
            if multiple 1 for the first 10 steps, multiple 0.1 for the next 20 steps, multiple 0.01 for the next 30
            steps and multiple 0.005 for the other steps.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    rules_dict = {}
    rule_list = step_rules.split(",")
    for rule_str in rule_list[:-1]:
        value_str, steps_str = rule_str.split(":")
        steps = int(steps_str)
        value = float(value_str)
        rules_dict[steps] = value
    last_lr_multiple = float(rule_list[-1])
    def create_rules_function(rules_dict, last_lr_multiple):
        def rule_func(steps: int) -> float:
            sorted_steps = sorted(rules_dict.keys())
            for i, sorted_step in enumerate(sorted_steps):
                if steps < sorted_step:
                    return rules_dict[sorted_steps[i]]
            return last_lr_multiple
        return rule_func
    rules_func = create_rules_function(rules_dict, last_lr_multiple)
    return LambdaLR(optimizer, rules_func, last_epoch=last_epoch)
def get_linear_schedule_with_warmup(
    optimizer: Optimizer, num_warmup_steps: int, num_training_steps: int, last_epoch: int = -1
) -> LambdaLR:
    Create a schedule with a learning rate that decreases linearly from the initial lr set in the optimizer to 0, after
    a warmup period during which it increases linearly from 0 to the initial lr set in the optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        num_warmup_steps (`int`):
            The number of steps for the warmup phase.
        num_training_steps (`int`):
            The total number of training steps.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    def lr_lambda(current_step: int):
        if current_step < num_warmup_steps:
            return float(current_step) / float(max(1, num_warmup_steps))
        return max(
            0.0, float(num_training_steps - current_step) / float(max(1, num_training_steps - num_warmup_steps))
    return LambdaLR(optimizer, lr_lambda, last_epoch)
def get_cosine_schedule_with_warmup(
    optimizer: Optimizer, num_warmup_steps: int, num_training_steps: int, num_cycles: float = 0.5, last_epoch: int = -1
) -> LambdaLR:
    Create a schedule with a learning rate that decreases following the values of the cosine function between the
    initial lr set in the optimizer to 0, after a warmup period during which it increases linearly between 0 and the
    initial lr set in the optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        num_warmup_steps (`int`):
            The number of steps for the warmup phase.
        num_training_steps (`int`):
            The total number of training steps.
        num_periods (`float`, *optional*, defaults to 0.5):
            The number of periods of the cosine function in a schedule (the default is to just decrease from the max
            value to 0 following a half-cosine).
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    def lr_lambda(current_step):
        if current_step < num_warmup_steps:
            return float(current_step) / float(max(1, num_warmup_steps))
        progress = float(current_step - num_warmup_steps) / float(max(1, num_training_steps - num_warmup_steps))
        return max(0.0, 0.5 * (1.0 + math.cos(math.pi * float(num_cycles) * 2.0 * progress)))
    return LambdaLR(optimizer, lr_lambda, last_epoch)
def get_cosine_with_hard_restarts_schedule_with_warmup(
    optimizer: Optimizer, num_warmup_steps: int, num_training_steps: int, num_cycles: int = 1, last_epoch: int = -1
) -> LambdaLR:
    Create a schedule with a learning rate that decreases following the values of the cosine function between the
    initial lr set in the optimizer to 0, with several hard restarts, after a warmup period during which it increases
    linearly between 0 and the initial lr set in the optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        num_warmup_steps (`int`):
            The number of steps for the warmup phase.
        num_training_steps (`int`):
            The total number of training steps.
        num_cycles (`int`, *optional*, defaults to 1):
            The number of hard restarts to use.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    def lr_lambda(current_step):
        if current_step < num_warmup_steps:
            return float(current_step) / float(max(1, num_warmup_steps))
        progress = float(current_step - num_warmup_steps) / float(max(1, num_training_steps - num_warmup_steps))
        if progress >= 1.0:
            return 0.0
        return max(0.0, 0.5 * (1.0 + math.cos(math.pi * ((float(num_cycles) * progress) % 1.0))))
    return LambdaLR(optimizer, lr_lambda, last_epoch)
def get_polynomial_decay_schedule_with_warmup(
    optimizer: Optimizer,
    num_warmup_steps: int,
    num_training_steps: int,
    lr_end: float = 1e-7,
    power: float = 1.0,
    last_epoch: int = -1,
) -> LambdaLR:
    Create a schedule with a learning rate that decreases as a polynomial decay from the initial lr set in the
    optimizer to end lr defined by *lr_end*, after a warmup period during which it increases linearly from 0 to the
    initial lr set in the optimizer.
        optimizer ([`~torch.optim.Optimizer`]):
            The optimizer for which to schedule the learning rate.
        num_warmup_steps (`int`):
            The number of steps for the warmup phase.
        num_training_steps (`int`):
            The total number of training steps.
        lr_end (`float`, *optional*, defaults to 1e-7):
            The end LR.
        power (`float`, *optional*, defaults to 1.0):
            Power factor.
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    Note: *power* defaults to 1.0 as in the fairseq implementation, which in turn is based on the original BERT
    implementation at
    https://github.com/google-research/bert/blob/f39e881b169b9d53bea03d2d341b31707a6c052b/optimization.py#L37
    Return:
        `torch.optim.lr_scheduler.LambdaLR` with the appropriate schedule.
    lr_init = optimizer.defaults["lr"]
    if not (lr_init > lr_end):
        raise ValueError(f"lr_end ({lr_end}) must be smaller than initial lr ({lr_init})")
    def lr_lambda(current_step: int):
        if current_step < num_warmup_steps:
            return float(current_step) / float(max(1, num_warmup_steps))
        elif current_step > num_training_steps:
            return lr_end / lr_init  # as LambdaLR multiplies by lr_init
        else:
            lr_range = lr_init - lr_end
            decay_steps = num_training_steps - num_warmup_steps
            pct_remaining = 1 - (current_step - num_warmup_steps) / decay_steps
            decay = lr_range * pct_remaining**power + lr_end
            return decay / lr_init  # as LambdaLR multiplies by lr_init
    return LambdaLR(optimizer, lr_lambda, last_epoch)
TYPE_TO_SCHEDULER_FUNCTION = {
    SchedulerType.LINEAR: get_linear_schedule_with_warmup,
    SchedulerType.COSINE: get_cosine_schedule_with_warmup,
    SchedulerType.COSINE_WITH_RESTARTS: get_cosine_with_hard_restarts_schedule_with_warmup,
    SchedulerType.POLYNOMIAL: get_polynomial_decay_schedule_with_warmup,
    SchedulerType.CONSTANT: get_constant_schedule,
    SchedulerType.CONSTANT_WITH_WARMUP: get_constant_schedule_with_warmup,
    SchedulerType.PIECEWISE_CONSTANT: get_piecewise_constant_schedule,
def get_scheduler(
    name: Union[str, SchedulerType],
    optimizer: Optimizer,
    step_rules: Optional[str] = None,
    num_warmup_steps: Optional[int] = None,
    num_training_steps: Optional[int] = None,
    num_cycles: int = 1,
    power: float = 1.0,
    last_epoch: int = -1,
) -> LambdaLR:
    Unified API to get any scheduler from its name.
        name (`str` or `SchedulerType`):
            The name of the scheduler to use.
        optimizer (`torch.optim.Optimizer`):
            The optimizer that will be used during training.
        step_rules (`str`, *optional*):
            A string representing the step rules to use. This is only used by the `PIECEWISE_CONSTANT` scheduler.
        num_warmup_steps (`int`, *optional*):
            The number of warmup steps to do. This is not required by all schedulers (hence the argument being
            optional), the function will raise an error if it's unset and the scheduler type requires it.
        num_training_steps (`int``, *optional*):
            The number of training steps to do. This is not required by all schedulers (hence the argument being
            optional), the function will raise an error if it's unset and the scheduler type requires it.
        num_cycles (`int`, *optional*):
            The number of hard restarts used in `COSINE_WITH_RESTARTS` scheduler.
        power (`float`, *optional*, defaults to 1.0):
            Power factor. See `POLYNOMIAL` scheduler
        last_epoch (`int`, *optional*, defaults to -1):
            The index of the last epoch when resuming training.
    name = SchedulerType(name)
    schedule_func = TYPE_TO_SCHEDULER_FUNCTION[name]
    if name == SchedulerType.CONSTANT:
        return schedule_func(optimizer, last_epoch=last_epoch)
    if name == SchedulerType.PIECEWISE_CONSTANT:
        return schedule_func(optimizer, step_rules=step_rules, last_epoch=last_epoch)
    # All other schedulers require `num_warmup_steps`
    if num_warmup_steps is None:
        raise ValueError(f"{name} requires `num_warmup_steps`, please provide that argument.")
    if name == SchedulerType.CONSTANT_WITH_WARMUP:
        return schedule_func(optimizer, num_warmup_steps=num_warmup_steps, last_epoch=last_epoch)
    # All other schedulers require `num_training_steps`
    if num_training_steps is None:
        raise ValueError(f"{name} requires `num_training_steps`, please provide that argument.")
    if name == SchedulerType.COSINE_WITH_RESTARTS:
        return schedule_func(
            optimizer,
            num_warmup_steps=num_warmup_steps,
            num_training_steps=num_training_steps,
            num_cycles=num_cycles,
            last_epoch=last_epoch,
    if name == SchedulerType.POLYNOMIAL:
        return schedule_func(
            optimizer,
            num_warmup_steps=num_warmup_steps,
            num_training_steps=num_training_steps,
            power=power,
            last_epoch=last_epoch,
    return schedule_func(
        optimizer, num_warmup_steps=num_warmup_steps, num_training_steps=num_training_steps, last_epoch=last_epoch
Sunbelt Computer Software

PL/B Language Development and Support

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Sunbelt Computer Software

PL/B Language Development and Support

FilesExpand file tree

optimization.py

Latest commit

History

optimization.py

File metadata and controls
