@@ -62,7 +62,7 @@ install it this way:
 $ make install plugins=~/.local/lib/wireshark/plugins/3.2/epan/
 
 If you want to install it in the system directory you can do it this way, the
-righ path is also in the Folder window. Change the plugins variable this way:
+right path is also in the Folder window. Change the plugins variable this way:
 
 $ sudo make install plugins=/usr/lib64/wireshark/plugins/3.2/epan/
 
 
@@ -339,18 +339,18 @@ fd_takeover():                                    |    do {
    old = {running, thread};                       |          return -1;
    new = {tid_bit, tid_bit};                      |       new = { running | tid_bit, old.thread }	 
    if (owner != expected) {                       |    } while (!dwcas({running, thread}, &old, &new));
-      atomic_and(runnning, ~tid_bit);             |
+      atomic_and(running, ~tid_bit);              |
       return -1; // fail                          | fd_clr_running():
    }                                              |    return atomic_and_fetch(running, ~tid_bit);
                                                   |
    while (old == {tid_bit, !=0 })                 | poll():
       if (dwcas({running, thread}, &old, &new)) { |    if (!owner)
-         atomic_and(runnning, ~tid_bit);          |       continue;
+         atomic_and(running, ~tid_bit);           |       continue;
          return 0; // success                     |
       }                                           |    if (!(thread_mask & tid_bit)) {
    }                                              |       epoll_ctl_del();
                                                   |       continue;
-   atomic_and(runnning, ~tid_bit);                |    }
+   atomic_and(running, ~tid_bit);                 |    }
    return -1; // fail                             |
                                                   |    // via fd_update_events()
 fd_delete():                                      |    if (fd_set_running() != -1) {
 
@@ -267,7 +267,7 @@ message. For HTTP/1 messages, it is the message body without the chunks
 formatting, if any. For HTTP/2, it is the payload of DATA frames.
 
 The DATA blocks are the only HTX blocks that may be partially processed (copied
-or removed). All other types of block must be entierly processed. This means
+or removed). All other types of block must be entirely processed. This means
 DATA blocks can be resized.
 
 
 
@@ -119,7 +119,7 @@ On other terminal, you can test with telnet:
 Usage of load parameters
 ------------------------
 
-HAProxy lua-load(-per-thread) directives allow a list of paramaters after
+HAProxy lua-load(-per-thread) directives allow a list of parameters after
 the lua file name. These parameters are accessible through an array of args
 using this code `local args = table.pack(...)` in the body of loaded file.
 
 
@@ -30,7 +30,7 @@
  * We're using a 3-state matching system :
  *   - PASS : at least one pattern already matches
  *   - MISS : some data is missing to decide if some rules may finally match.
- *   - FAIL : no mattern may ever match
+ *   - FAIL : no pattern may ever match
  *
  * We assign values 0, 1 and 3 to FAIL, MISS and PASS respectively, so that we
  * can make use of standard arithmetic for the truth tables below :
 
@@ -31,7 +31,7 @@
 /* action flags.
  * Please also update the txn_show_flags() function below in case of changes.
  */
-/* Unusued: 0x00000001..0x00000004 */
+/* Unused: 0x00000001..0x00000004 */
 #define TX_CONST_REPLY  0x00000008      /* The http reply must not be rewritten (don't eval after-response ruleset) */
 #define TX_CLTARPIT	0x00000010	/* the transaction is tarpitted (anti-dos) */
 
 
@@ -863,7 +863,7 @@
 								 * (tmpelt2.prev == NULL on first run)              \
 								 */                                                 \
 								_MT_LIST_UNLOCK_PREV(tmpelt, tmpelt2.prev);         \
-								/* unlock_prev will implicitely relink:             \
+								/* unlock_prev will implicitly relink:              \
 								 * elt->prev = prev                                 \
 								 * prev->next = elt                                 \
 								 */                                                 \
 
@@ -36,7 +36,7 @@
  * ACLs :
  *   - PASS : at least one pattern already matches
  *   - MISS : some data is missing to decide if some rules may finally match.
- *   - FAIL : no mattern may ever match
+ *   - FAIL : no pattern may ever match
  *
  * We assign values 0, 1 and 3 to FAIL, MISS and PASS respectively, so that we
  * can make use of standard arithmetic for the truth tables below :
 
@@ -45,7 +45,7 @@ void pendconn_unlink(struct pendconn *p);
  * function to be used by default when unsure. Do not call it with server
  * or proxy locks held however. Warning: this is called from stream_free()
  * which may run concurrently with pendconn_process_next_strm() which can be
- * dequeing the entry. The function must not return until the pendconn is
+ * dequeuing the entry. The function must not return until the pendconn is
  * guaranteed not to be known, which means that we must check its presence
  * in the tree under the queue's lock so that penconn_process_next_strm()
  * finishes before we return in case it would have grabbed this pendconn. See
 
@@ -39,7 +39,7 @@
 #define QUIC_LOSS_TIME_THRESHOLD_MULTIPLICAND 9
 #define QUIC_LOSS_TIME_THRESHOLD_DIVISOR      8
 
-/* Note that all the unit of variables for QUIC LOSS dectections
+/* Note that all the unit of variables for QUIC LOSS detections
  * is the tick.
  */
Original file line number	Diff line number	Diff line change
`@@ -30,7 +30,7 @@`
`30`	`30`	`* We're using a 3-state matching system :`
`31`	`31`	`* - PASS : at least one pattern already matches`
`32`	`32`	`* - MISS : some data is missing to decide if some rules may finally match.`
`33`		`- * - FAIL : no mattern may ever match`
	`33`	`+ * - FAIL : no pattern may ever match`
`34`	`34`	`*`
`35`	`35`	`* We assign values 0, 1 and 3 to FAIL, MISS and PASS respectively, so that we`
`36`	`36`	`* can make use of standard arithmetic for the truth tables below :`
Original file line number	Diff line number	Diff line change
`@@ -36,7 +36,7 @@`
`36`	`36`	`* ACLs :`
`37`	`37`	`* - PASS : at least one pattern already matches`
`38`	`38`	`* - MISS : some data is missing to decide if some rules may finally match.`
`39`		`- * - FAIL : no mattern may ever match`
	`39`	`+ * - FAIL : no pattern may ever match`
`40`	`40`	`*`
`41`	`41`	`* We assign values 0, 1 and 3 to FAIL, MISS and PASS respectively, so that we`
`42`	`42`	`* can make use of standard arithmetic for the truth tables below :`