Activity

1. mdblack98 commented on Jan 28, 2024

   

   mdblack98

   on Jan 28, 2024 via email

   Contributor

   More actions

   Could you please add one more v to the debug output? This is a hamlib problem. Mike W9MDB On Sunday, January 28, 2024 at 11:47:10 AM CST, Bob Coggeshall ***@***.***> wrote: This issue is closely related to the issue with the 9700 - #181 I'm using Gpredict 2.2.2 rigctl Hamlib 4.5.5 Apr 05 11:43:08Z 2023 SHA=6eecd3 Gpredict radio configuration: image.png (view on web) Movie of display behavior https://i.imgur.com/aISSRul.mp4 I read that this was apparently fixed for the IC-9700 but apparently it hasn't for the IC-910? Here is a rigctld -vvvv -Z output: ic910-doppler-issue-trace.txt ..Or should this issue be taken up with hamlib? Thanks for all the great software! — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
2. sudobob commented on Jan 28, 2024

   

   sudobob

   on Jan 28, 2024

   Author

   More actions

   I ran the -vvvvv.. I was getting different and inconsistent behavior and was noticing alot 'rig rejected commands'. My IC-910 baud rate was set to Auto. I set it to 19200 and also explicitly started rigctl with --serial-speed=19200 and now things seem more consistent.

   You can close this issue. Thanks.
3. mdblack98 commented on Jan 28, 2024

   

   mdblack98

   on Jan 28, 2024 via email

   Contributor

   More actions

   You mean it's working now? On Sunday, January 28, 2024 at 01:55:02 PM CST, Bob Coggeshall ***@***.***> wrote: I ran the -vvvvv.. I was getting different and inconsistent behavior and was noticing alot 'rig rejected commands'. My IC-910 baud rate was set to Auto. I set it to 19200 and also explicitly started rigctl with --serial-speed=19200 and now things seem more consistent. You can close this issue. Thanks. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: ***@***.***>
4. sudobob commented on Jan 29, 2024

   

   sudobob

   on Jan 29, 2024

   Author

   More actions

   Yes. So far as I have tested It looks like the erratic behavior was all due to serial line errors. If I do leave it for a long time they crop up. Also things don't work right if I stay in the radio control window and try to switch satellites.. these issues are resolved be exiting and re-entering the radio control dialog..
5. wkitty42 commented on Jan 29, 2024

   

   wkitty42

   on Jan 29, 2024 via email

   More actions

   On 1/29/24 8:07 AM, Bob Coggeshall wrote: Yes. So far as I have tested It looks like the erratic behavior was all due to serial line errors. If I do leave it for a long time they crop up.

   have you tried 9600? it is slower but generally also less susceptible to noise... i'm curious if they still crop up after a while, the same, longer, or shorter than what you are seeing at 19200... or maybe they are in time with other electrical events... i have other thoughts but they are more on the serial side than gpredict so i'll stop here ;)