const char *s;

switch(type) {

case POINTS_COINCIDENT: s = "pts-coincident"; break;

case PT_PT_DISTANCE: s = "pt-pt-distance"; break;

case PT_LINE_DISTANCE: s = "pt-line-distance"; break;

case PT_PLANE_DISTANCE: s = "pt-plane-distance"; break;

case PT_FACE_DISTANCE: s = "pt-face-distance"; break;

case PROJ_PT_DISTANCE: s = "proj-pt-pt-distance"; break;

case PT_IN_PLANE: s = "pt-in-plane"; break;

case PT_ON_LINE: s = "pt-on-line"; break;

case PT_ON_FACE: s = "pt-on-face"; break;

case EQUAL_LENGTH_LINES: s = "eq-length"; break;

case EQ_LEN_PT_LINE_D: s = "eq-length-and-pt-ln-dist"; break;

case EQ_PT_LN_DISTANCES: s = "eq-pt-line-distances"; break;

case LENGTH_RATIO: s = "length-ratio"; break;

case LENGTH_DIFFERENCE: s = "length-difference"; break;

case SYMMETRIC: s = "symmetric"; break;

case SYMMETRIC_HORIZ: s = "symmetric-h"; break;

case SYMMETRIC_VERT: s = "symmetric-v"; break;

case SYMMETRIC_LINE: s = "symmetric-line"; break;

case AT_MIDPOINT: s = "at-midpoint"; break;

case HORIZONTAL: s = "horizontal"; break;

case VERTICAL: s = "vertical"; break;

case DIAMETER: s = "diameter"; break;

case PT_ON_CIRCLE: s = "pt-on-circle"; break;

case SAME_ORIENTATION: s = "same-orientation"; break;

case ANGLE: s = "angle"; break;

case PARALLEL: s = "parallel"; break;

case ARC_LINE_TANGENT: s = "arc-line-tangent"; break;

case CUBIC_LINE_TANGENT: s = "cubic-line-tangent"; break;

case CURVE_CURVE_TANGENT: s = "curve-curve-tangent"; break;

case PERPENDICULAR: s = "perpendicular"; break;

case EQUAL_RADIUS: s = "eq-radius"; break;

case EQUAL_ANGLE: s = "eq-angle"; break;

case EQUAL_LINE_ARC_LEN: s = "eq-line-len-arc-len"; break;

case WHERE_DRAGGED: s = "lock-where-dragged"; break;

case COMMENT: s = "comment"; break;

default: s = "???"; break;

}

return ssprintf("c%03x-%s", h.v, s);

{

SK.constraint.ClearTags();

for(int i = 0; i < SK.constraint.n; i++) {

ConstraintBase *ct = &(SK.constraint.elem[i]);

if(ct->type != type) continue;

if(ct->entityA.v != entityA.v) continue;

if(ct->ptA.v != ptA.v) continue;

ct->tag = 1;

}

SK.constraint.RemoveTagged();

// And no need to do anything special, since nothing

// ever depends on a constraint. But do clear the

// hover, in case the just-deleted constraint was

// hovered.

SS.GW.hover.Clear();

if(rememberForUndo) SS.UndoRemember();

SK.constraint.AddAndAssignId(c);

SS.MarkGroupDirty(c->group);

SS.ScheduleGenerateAll();

return c->h;

hEntity entityA, hEntity entityB,

bool other, bool other2)

{

Constraint c = {};

c.group = SS.GW.activeGroup;

c.workplane = SS.GW.ActiveWorkplane();

c.type = type;

c.ptA = ptA;

c.ptB = ptB;

c.entityA = entityA;

c.entityB = entityB;

c.other = other;

c.other2 = other2;

return AddConstraint(&c, false);

Constraint c = {};

c.group = SS.GW.activeGroup;

c.workplane = SS.GW.ActiveWorkplane();

SS.GW.GroupSelection();

#define gs (SS.GW.gs)

switch(id) {

case GraphicsWindow::MNU_DISTANCE_DIA:

case GraphicsWindow::MNU_REF_DISTANCE: {

if(gs.points == 2 && gs.n == 2) {

c.type = PT_PT_DISTANCE;

c.ptA = gs.point[0];

c.ptB = gs.point[1];

} else if(gs.lineSegments == 1 && gs.n == 1) {

c.type = PT_PT_DISTANCE;

Entity *e = SK.GetEntity(gs.entity[0]);

c.ptA = e->point[0];

c.ptB = e->point[1];

} else if(gs.vectors == 1 && gs.points == 2 && gs.n == 3) {

c.type = PROJ_PT_DISTANCE;

c.ptA = gs.point[0];

c.ptB = gs.point[1];

c.entityA = gs.vector[0];

} else if(gs.workplanes == 1 && gs.points == 1 && gs.n == 2) {

c.type = PT_PLANE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.lineSegments == 1 && gs.points == 1 && gs.n == 2) {

c.type = PT_LINE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.faces == 1 && gs.points == 1 && gs.n == 2) {

c.type = PT_FACE_DISTANCE;

c.ptA = gs.point[0];

c.entityA = gs.face[0];

} else if(gs.circlesOrArcs == 1 && gs.n == 1) {

c.type = DIAMETER;

c.entityA = gs.entity[0];

} else {

Error(

" * a circle or an arc (diameter)\n");

return;

}

if(c.type == PT_PT_DISTANCE || c.type == PROJ_PT_DISTANCE) {

Vector n = SS.GW.projRight.Cross(SS.GW.projUp);

Vector a = SK.GetEntity(c.ptA)->PointGetNum();

Vector b = SK.GetEntity(c.ptB)->PointGetNum();

c.disp.offset = n.Cross(a.Minus(b));

c.disp.offset = (c.disp.offset).WithMagnitude(50/SS.GW.scale);

} else {

c.disp.offset = Vector::From(0, 0, 0);

}

if(id == GraphicsWindow::MNU_REF_DISTANCE) {

c.reference = true;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

break;

}

case GraphicsWindow::MNU_ON_ENTITY:

if(gs.points == 2 && gs.n == 2) {

c.type = POINTS_COINCIDENT;

c.ptA = gs.point[0];

c.ptB = gs.point[1];

} else if(gs.points == 1 && gs.workplanes == 1 && gs.n == 2) {

c.type = PT_IN_PLANE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.points == 1 && gs.lineSegments == 1 && gs.n == 2) {

c.type = PT_ON_LINE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.points == 1 && gs.circlesOrArcs == 1 && gs.n == 2) {

c.type = PT_ON_CIRCLE;

c.ptA = gs.point[0];

c.entityA = gs.entity[0];

} else if(gs.points == 1 && gs.faces == 1 && gs.n == 2) {

c.type = PT_ON_FACE;

c.ptA = gs.point[0];

c.entityA = gs.face[0];

} else {

Error("Bad selection for on point / curve / plane constraint. "

"This constraint can apply to:\n\n"

" * two points (points coincident)\n"

" * a point and a workplane (point in plane)\n"

" * a point and a line segment (point on line)\n"

" * a point and a circle or arc (point on curve)\n"

" * a point and a plane face (point on face)\n");

return;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_EQUAL:

if(gs.lineSegments == 2 && gs.n == 2) {

c.type = EQUAL_LENGTH_LINES;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

} else if(gs.lineSegments == 2 && gs.points == 2 && gs.n == 4) {

c.type = EQ_PT_LN_DISTANCES;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.entityB = gs.entity[1];

c.ptB = gs.point[1];

} else if(gs.lineSegments == 1 && gs.points == 2 && gs.n == 3) {

// The same line segment for the distances, but different

// points.

c.type = EQ_PT_LN_DISTANCES;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.entityB = gs.entity[0];

c.ptB = gs.point[1];

} else if(gs.lineSegments == 2 && gs.points == 1 && gs.n == 3) {

c.type = EQ_LEN_PT_LINE_D;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

c.ptA = gs.point[0];

} else if(gs.vectors == 4 && gs.n == 4) {

c.type = EQUAL_ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.entityC = gs.vector[2];

c.entityD = gs.vector[3];

} else if(gs.vectors == 3 && gs.n == 3) {

c.type = EQUAL_ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.entityC = gs.vector[1];

c.entityD = gs.vector[2];

} else if(gs.circlesOrArcs == 2 && gs.n == 2) {

c.type = EQUAL_RADIUS;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

} else if(gs.arcs == 1 && gs.lineSegments == 1 && gs.n == 2) {

c.type = EQUAL_LINE_ARC_LEN;

if(SK.GetEntity(gs.entity[0])->type == Entity::ARC_OF_CIRCLE) {

c.entityA = gs.entity[1];

c.entityB = gs.entity[0];

} else {

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

}

} else {

Error("Bad selection for equal length / radius constraint. "

"This constraint can apply to:\n\n"

" * two line segments (equal length)\n"

" * two line segments and two points "

"(equal point-line distances)\n"

" * a line segment and two points "

"(equal point-line distances)\n"

" * a line segment, and a point and line segment "

"(point-line distance equals length)\n"

" * four line segments or normals "

"(equal angle between A,B and C,D)\n"

" * three line segments or normals "

"(equal angle between A,B and B,C)\n"

" * two circles or arcs (equal radius)\n"

" * a line segment and an arc "

"(line segment length equals arc length)\n");

return;

}

if(c.type == EQUAL_ANGLE) {

// Infer the nearest supplementary angle from the sketch.

Vector a1 = SK.GetEntity(c.entityA)->VectorGetNum(),

b1 = SK.GetEntity(c.entityB)->VectorGetNum(),

a2 = SK.GetEntity(c.entityC)->VectorGetNum(),

b2 = SK.GetEntity(c.entityD)->VectorGetNum();

double d1 = a1.Dot(b1), d2 = a2.Dot(b2);

if(d1*d2 < 0) {

c.other = true;

}

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_RATIO:

if(gs.lineSegments == 2 && gs.n == 2) {

c.type = LENGTH_RATIO;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

} else {

Error("Bad selection for length ratio constraint. This "

"constraint can apply to:\n\n"

" * two line segments\n");

return;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

break;

case GraphicsWindow::MNU_DIFFERENCE:

if(gs.lineSegments == 2 && gs.n == 2) {

c.type = LENGTH_DIFFERENCE;

c.entityA = gs.entity[0];

c.entityB = gs.entity[1];

} else {

Error("Bad selection for length difference constraint. This "

"constraint can apply to:\n\n"

" * two line segments\n");

return;

}

c.valA = 0;

c.ModifyToSatisfy();

AddConstraint(&c);

break;

case GraphicsWindow::MNU_AT_MIDPOINT:

if(gs.lineSegments == 1 && gs.points == 1 && gs.n == 2) {

c.type = AT_MIDPOINT;

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

// If a point is at-midpoint, then no reason to also constrain

// it on-line; so auto-remove that.

DeleteAllConstraintsFor(PT_ON_LINE, c.entityA, c.ptA);

} else if(gs.lineSegments == 1 && gs.workplanes == 1 && gs.n == 2) {

c.type = AT_MIDPOINT;

int i = SK.GetEntity(gs.entity[0])->IsWorkplane() ? 1 : 0;

c.entityA = gs.entity[i];

c.entityB = gs.entity[1-i];

} else {

Error("Bad selection for at midpoint constraint. This "

"constraint can apply to:\n\n"

" * a line segment and a point "

"(point at midpoint)\n"

" * a line segment and a workplane "

"(line's midpoint on plane)\n");

return;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_SYMMETRIC:

if(gs.points == 2 &&

((gs.workplanes == 1 && gs.n == 3) ||

(gs.n == 2)))

{

if(gs.entities > 0)

c.entityA = gs.entity[0];

c.ptA = gs.point[0];

c.ptB = gs.point[1];

} else if(gs.lineSegments == 1 &&

((gs.workplanes == 1 && gs.n == 2) ||

(gs.n == 1)))

{

Entity *line;

if(SK.GetEntity(gs.entity[0])->IsWorkplane()) {

line = SK.GetEntity(gs.entity[1]);

c.entityA = gs.entity[0];

} else {

line = SK.GetEntity(gs.entity[0]);

}

c.ptA = line->point[0];

c.ptB = line->point[1];

} else if(SS.GW.LockedInWorkplane()

&& gs.lineSegments == 2 && gs.n == 2)

{

Entity *l0 = SK.GetEntity(gs.entity[0]),

*l1 = SK.GetEntity(gs.entity[1]);

if((l1->group.v != SS.GW.activeGroup.v) ||

(l1->construction && !(l0->construction)))

{

swap(l0, l1);

}

c.ptA = l1->point[0];

c.ptB = l1->point[1];

c.entityA = l0->h;

c.type = SYMMETRIC_LINE;

} else if(SS.GW.LockedInWorkplane()

&& gs.lineSegments == 1 && gs.points == 2 && gs.n == 3)

{

c.ptA = gs.point[0];

c.ptB = gs.point[1];

c.entityA = gs.entity[0];

c.type = SYMMETRIC_LINE;

} else {

Error("Bad selection for symmetric constraint. This constraint "

"can apply to:\n\n"

" * two points or a line segment "

"(symmetric about workplane's coordinate axis)\n"

" * line segment, and two points or a line segment "

"(symmetric about line segment)\n"

" * workplane, and two points or a line segment "

"(symmetric about workplane)\n");

return;

}

if(c.type != 0) {

// Already done, symmetry about a line segment in a workplane

} else if(c.entityA.v == Entity::NO_ENTITY.v) {

// Horizontal / vertical symmetry, implicit symmetry plane

// normal to the workplane

if(c.workplane.v == Entity::FREE_IN_3D.v) {

Error("Must be locked in to workplane when constraining "

"symmetric without an explicit symmetry plane.");

return;

}

Vector pa = SK.GetEntity(c.ptA)->PointGetNum();

Vector pb = SK.GetEntity(c.ptB)->PointGetNum();

Vector dp = pa.Minus(pb);

EntityBase *norm = SK.GetEntity(c.workplane)->Normal();;

Vector u = norm->NormalU(), v = norm->NormalV();

if(fabs(dp.Dot(u)) > fabs(dp.Dot(v))) {

c.type = SYMMETRIC_HORIZ;

} else {

c.type = SYMMETRIC_VERT;

}

if(gs.lineSegments == 1) {

// If this line segment is already constrained horiz or

// vert, then auto-remove that redundant constraint.

DeleteAllConstraintsFor(HORIZONTAL, (gs.entity[0]),

Entity::NO_ENTITY);

DeleteAllConstraintsFor(VERTICAL, (gs.entity[0]),

Entity::NO_ENTITY);

}

} else {

// Symmetry with a symmetry plane specified explicitly.

c.type = SYMMETRIC;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_VERTICAL:

case GraphicsWindow::MNU_HORIZONTAL: {

hEntity ha, hb;

if(c.workplane.v == Entity::FREE_IN_3D.v) {

Error("Select workplane before constraining horiz/vert.");

return;

}

if(gs.lineSegments == 1 && gs.n == 1) {

c.entityA = gs.entity[0];

Entity *e = SK.GetEntity(c.entityA);

ha = e->point[0];

hb = e->point[1];

} else if(gs.points == 2 && gs.n == 2) {

ha = c.ptA = gs.point[0];

hb = c.ptB = gs.point[1];

} else {

Error("Bad selection for horizontal / vertical constraint. "

"This constraint can apply to:\n\n"

" * two points\n"

" * a line segment\n");

return;

}

if(id == GraphicsWindow::MNU_HORIZONTAL) {

c.type = HORIZONTAL;

} else {

c.type = VERTICAL;

}

AddConstraint(&c);

break;

}

case GraphicsWindow::MNU_ORIENTED_SAME: {

if(gs.anyNormals == 2 && gs.n == 2) {

c.type = SAME_ORIENTATION;

c.entityA = gs.anyNormal[0];

c.entityB = gs.anyNormal[1];

} else {

Error("Bad selection for same orientation constraint. This "

"constraint can apply to:\n\n"

" * two normals\n");

return;

}

SS.UndoRemember();

Entity *nfree = SK.GetEntity(c.entityA);

Entity *nref = SK.GetEntity(c.entityB);

if(nref->group.v == SS.GW.activeGroup.v) {

swap(nref, nfree);

}

if(nfree->group.v == SS.GW.activeGroup.v &&

nref ->group.v != SS.GW.activeGroup.v)

{

// nfree is free, and nref is locked (since it came from a

// previous group); so let's force nfree aligned to nref,

// and make convergence easy

Vector ru = nref ->NormalU(), rv = nref ->NormalV();

Vector fu = nfree->NormalU(), fv = nfree->NormalV();

if(fabs(fu.Dot(ru)) < fabs(fu.Dot(rv))) {

// There might be an odd*90 degree rotation about the

// normal vector; allow that, since the numerical

// constraint does

swap(ru, rv);

}

fu = fu.Dot(ru) > 0 ? ru : ru.ScaledBy(-1);

fv = fv.Dot(rv) > 0 ? rv : rv.ScaledBy(-1);

nfree->NormalForceTo(Quaternion::From(fu, fv));

}

AddConstraint(&c, false);

break;

}

case GraphicsWindow::MNU_OTHER_ANGLE:

if(gs.constraints == 1 && gs.n == 0) {

Constraint *c = SK.GetConstraint(gs.constraint[0]);

if(c->type == ANGLE) {

SS.UndoRemember();

c->other = !(c->other);

c->ModifyToSatisfy();

break;

}

if(c->type == EQUAL_ANGLE) {

SS.UndoRemember();

c->other = !(c->other);

SS.MarkGroupDirty(c->group);

SS.ScheduleGenerateAll();

break;

}

}

Error("Must select an angle constraint.");

return;

case GraphicsWindow::MNU_REFERENCE:

if(gs.constraints == 1 && gs.n == 0) {

Constraint *c = SK.GetConstraint(gs.constraint[0]);

if(c->HasLabel() && c->type != COMMENT) {

(c->reference) = !(c->reference);

SK.GetGroup(c->group)->clean = false;

SS.GenerateAll();

break;

}

}

Error("Must select a constraint with associated label.");

return;

case GraphicsWindow::MNU_ANGLE:

case GraphicsWindow::MNU_REF_ANGLE: {

if(gs.vectors == 2 && gs.n == 2) {

c.type = ANGLE;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

c.valA = 0;

} else {

Error("Bad selection for angle constraint. This constraint "

"can apply to:\n\n"

" * two line segments\n"

" * a line segment and a normal\n"

" * two normals\n");

return;

}

Entity *ea = SK.GetEntity(c.entityA),

*eb = SK.GetEntity(c.entityB);

if(ea->type == Entity::LINE_SEGMENT &&

eb->type == Entity::LINE_SEGMENT)

{

Vector a0 = SK.GetEntity(ea->point[0])->PointGetNum(),

a1 = SK.GetEntity(ea->point[1])->PointGetNum(),

b0 = SK.GetEntity(eb->point[0])->PointGetNum(),

b1 = SK.GetEntity(eb->point[1])->PointGetNum();

if(a0.Equals(b0) || a1.Equals(b1)) {

// okay, vectors should be drawn in same sense

} else if(a0.Equals(b1) || a1.Equals(b0)) {

// vectors are in opposite sense

c.other = true;

} else {

// no shared point; not clear which intersection to draw

}

}

if(id == GraphicsWindow::MNU_REF_ANGLE) {

c.reference = true;

}

c.ModifyToSatisfy();

AddConstraint(&c);

break;

}

case GraphicsWindow::MNU_PARALLEL:

if(gs.vectors == 2 && gs.n == 2) {

c.type = PARALLEL;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

} else if(gs.lineSegments == 1 && gs.arcs == 1 && gs.n == 2) {

Entity *line = SK.GetEntity(gs.entity[0]);

Entity *arc = SK.GetEntity(gs.entity[1]);

if(line->type == Entity::ARC_OF_CIRCLE) {

swap(line, arc);

}

Vector l0 = SK.GetEntity(line->point[0])->PointGetNum(),

l1 = SK.GetEntity(line->point[1])->PointGetNum();

Vector a1 = SK.GetEntity(arc->point[1])->PointGetNum(),

a2 = SK.GetEntity(arc->point[2])->PointGetNum();

if(l0.Equals(a1) || l1.Equals(a1)) {

c.other = false;

} else if(l0.Equals(a2) || l1.Equals(a2)) {

c.other = true;

} else {

Error("The tangent arc and line segment must share an "

"endpoint. Constrain them with Constrain -> "

"On Point before constraining tangent.");

return;

}

c.type = ARC_LINE_TANGENT;

c.entityA = arc->h;

c.entityB = line->h;

} else if(gs.lineSegments == 1 && gs.cubics == 1 && gs.n == 2) {

Entity *line = SK.GetEntity(gs.entity[0]);

Entity *cubic = SK.GetEntity(gs.entity[1]);

if(line->type == Entity::CUBIC) {

swap(line, cubic);

}

Vector l0 = SK.GetEntity(line->point[0])->PointGetNum(),

l1 = SK.GetEntity(line->point[1])->PointGetNum();

Vector as = cubic->CubicGetStartNum(),

af = cubic->CubicGetFinishNum();

if(l0.Equals(as) || l1.Equals(as)) {

c.other = false;

} else if(l0.Equals(af) || l1.Equals(af)) {

c.other = true;

} else {

Error("The tangent cubic and line segment must share an "

"endpoint. Constrain them with Constrain -> "

"On Point before constraining tangent.");

return;

}

c.type = CUBIC_LINE_TANGENT;

c.entityA = cubic->h;

c.entityB = line->h;

} else if(gs.cubics + gs.arcs == 2 && gs.n == 2) {

if(!SS.GW.LockedInWorkplane()) {

Error("Curve-curve tangency must apply in workplane.");

return;

}

Entity *eA = SK.GetEntity(gs.entity[0]),

*eB = SK.GetEntity(gs.entity[1]);

Vector as = eA->EndpointStart(),

af = eA->EndpointFinish(),

bs = eB->EndpointStart(),

bf = eB->EndpointFinish();

if(as.Equals(bs)) {

c.other = false; c.other2 = false;

} else if(as.Equals(bf)) {

c.other = false; c.other2 = true;

} else if(af.Equals(bs)) {

c.other = true; c.other2 = false;

} else if(af.Equals(bf)) {

c.other = true; c.other2 = true;

} else {

Error("The curves must share an endpoint. Constrain them "

"with Constrain -> On Point before constraining "

"tangent.");

return;

}

c.type = CURVE_CURVE_TANGENT;

c.entityA = eA->h;

c.entityB = eB->h;

} else {

Error("Bad selection for parallel / tangent constraint. This "

"constraint can apply to:\n\n"

" * two line segments (parallel)\n"

" * a line segment and a normal (parallel)\n"

" * two normals (parallel)\n"

" * two line segments, arcs, or beziers, that share "

"an endpoint (tangent)\n");

return;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_PERPENDICULAR:

if(gs.vectors == 2 && gs.n == 2) {

c.type = PERPENDICULAR;

c.entityA = gs.vector[0];

c.entityB = gs.vector[1];

} else {

Error("Bad selection for perpendicular constraint. This "

"constraint can apply to:\n\n"

" * two line segments\n"

" * a line segment and a normal\n"

" * two normals\n");

return;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_WHERE_DRAGGED:

if(gs.points == 1 && gs.n == 1) {

c.type = WHERE_DRAGGED;

c.ptA = gs.point[0];

} else {

Error("Bad selection for lock point where dragged constraint. "

"This constraint can apply to:\n\n"

" * a point\n");

return;

}

AddConstraint(&c);

break;

case GraphicsWindow::MNU_COMMENT:

SS.GW.pending.operation = GraphicsWindow::MNU_COMMENT;

SS.GW.pending.description = "click center of comment text";

SS.ScheduleShowTW();

break;

default: oops();

}

SS.GW.ClearSelection();

InvalidateGraphics();