static void MX_LPTIM1_Init(void)
{

  /* USER CODE BEGIN LPTIM1_Init 0 */

  /* USER CODE END LPTIM1_Init 0 */

  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

  /** Initializes the peripherals clock
  */
  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
  PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSI;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
  {
    Error_Handler();
  }

  /* Peripheral clock enable */
  LL_APB3_GRP1_EnableClock(LL_APB3_GRP1_PERIPH_LPTIM1);

  /* USER CODE BEGIN LPTIM1_Init 1 */

  /* USER CODE END LPTIM1_Init 1 */
  LL_LPTIM_Enable(LPTIM1);
  LL_LPTIM_ClearFlag_REPOK(LPTIM1);
  LL_LPTIM_SetRepetition(LPTIM1, 0);

   /* Wait till REPOK Flag is ready */
  while(!LL_LPTIM_IsActiveFlag_REPOK(LPTIM1))
  {
  }
  LL_LPTIM_ClearFlag_ARROK(LPTIM1);
  LL_LPTIM_SetAutoReload(LPTIM1, 65535);

   /* Wait till ARROK Flag is ready */
  while(!LL_LPTIM_IsActiveFlag_ARROK(LPTIM1))
  {
  }
  LL_LPTIM_Disable(LPTIM1);
  LL_LPTIM_SetClockSource(LPTIM1, LL_LPTIM_CLK_SOURCE_INTERNAL);
  LL_LPTIM_SetPrescaler(LPTIM1, LL_LPTIM_PRESCALER_DIV1);
  LL_LPTIM_SetUpdateMode(LPTIM1, LL_LPTIM_UPDATE_MODE_IMMEDIATE);
  LL_LPTIM_SetCounterMode(LPTIM1, LL_LPTIM_COUNTER_MODE_INTERNAL);
  LL_LPTIM_TrigSw(LPTIM1);
  LL_LPTIM_SetInput1Src(LPTIM1, LL_LPTIM_INPUT1_SRC_GPIO);
  LL_LPTIM_SetInput2Src(LPTIM1, LL_LPTIM_INPUT2_SRC_GPIO);
  /* USER CODE BEGIN LPTIM1_Init 2 */

  LL_LPTIM_Enable(LPTIM1);

  LL_LPTIM_ClearFlag_DIEROK(LPTIM1);
  LL_LPTIM_EnableIT_CC1(LPTIM1);
  while (!LL_LPTIM_IsActiveFlag_DIEROK(LPTIM1))
  {
  }
  LL_LPTIM_StartCounter(LPTIM1, LL_LPTIM_OPERATING_MODE_CONTINUOUS);

  /* Enable LPTIM1 autonomous mode to wake up from stop modes. */
  LL_SRDAMR_GRP1_EnableAutonomousClock(LL_SRDAMR_GRP1_PERIPH_LPTIM1AMEN);

  /* USER CODE END LPTIM1_Init 2 */

}