iframe-proxy | Sunbelt Computer Software

173 lines (159 loc) · 5.5 KB
#ifndef _LINUX_BYTEORDER_GENERIC_H
#define _LINUX_BYTEORDER_GENERIC_H
 * linux/byteorder_generic.h
 * Generic Byte-reordering support
 * The "... p" macros, like le64_to_cpup, can be used with pointers
 * to unaligned data, but there will be a performance penalty on 
 * some architectures.  Use get_unaligned for unaligned data.
 * Francois-Rene Rideau <fare@tunes.org> 19970707
 *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
 *    cleaned them up.
 *    I hope it is compliant with non-GCC compilers.
 *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
 *    because I wasn't sure it would be ok to put it in types.h
 *    Upgraded it to 2.1.43
 * Francois-Rene Rideau <fare@tunes.org> 19971012
 *    Upgraded it to 2.1.57
 *    to please Linus T., replaced huge #ifdef's between little/big endian
 *    by nestedly #include'd files.
 * Francois-Rene Rideau <fare@tunes.org> 19971205
 *    Made it to 2.1.71; now a facelift:
 *    Put files under include/linux/byteorder/
 *    Split swab from generic support.
 *   = Regular kernel maintainers could also replace all these manual
 *    byteswap macros that remain, disseminated among drivers,
 *    after some grep or the sources...
 *   = Linus might want to rename all these macros and files to fit his taste,
 *    to fit his personal naming scheme.
 *   = it seems that a few drivers would also appreciate
 *    nybble swapping support...
 *   = every architecture could add their byteswap macro in asm/byteorder.h
 *    see how some architectures already do (i386, alpha, ppc, etc)
 *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
 *    distinguished throughout the kernel. This is not the case currently,
 *    since little endian, big endian, and pdp endian machines needn't it.
 *    But this might be the case for, say, a port of Linux to 20/21 bit
 *    architectures (and F21 Linux addict around?).
 * The following macros are to be defined by <asm/byteorder.h>:
 * Conversion of long and short int between network and host format
 *	ntohl(__u32 x)
 *	ntohs(__u16 x)
 *	htonl(__u32 x)
 *	htons(__u16 x)
 * It seems that some programs (which? where? or perhaps a standard? POSIX?)
 * might like the above to be functions, not macros (why?).
 * if that's true, then detect them, and take measures.
 * Anyway, the measure is: define only ___ntohl as a macro instead,
 * and in a separate file, have
 * unsigned long inline ntohl(x){return ___ntohl(x);}
 * The same for constant arguments
 *	__constant_ntohl(__u32 x)
 *	__constant_ntohs(__u16 x)
 *	__constant_htonl(__u32 x)
 *	__constant_htons(__u16 x)
 * Conversion of XX-bit integers (16- 32- or 64-)
 * between native CPU format and little/big endian format
 * 64-bit stuff only defined for proper architectures
 *	cpu_to_[bl]eXX(__uXX x)
 *	[bl]eXX_to_cpu(__uXX x)
 * The same, but takes a pointer to the value to convert
 *	cpu_to_[bl]eXXp(__uXX x)
 *	[bl]eXX_to_cpup(__uXX x)
 * The same, but change in situ
 *	cpu_to_[bl]eXXs(__uXX x)
 *	[bl]eXX_to_cpus(__uXX x)
 * See asm-foo/byteorder.h for examples of how to provide
 * architecture-optimized versions
#define cpu_to_le64 __cpu_to_le64
#define le64_to_cpu __le64_to_cpu
#define cpu_to_le32 __cpu_to_le32
#define le32_to_cpu __le32_to_cpu
#define cpu_to_le16 __cpu_to_le16
#define le16_to_cpu __le16_to_cpu
#define cpu_to_be64 __cpu_to_be64
#define be64_to_cpu __be64_to_cpu
#define cpu_to_be32 __cpu_to_be32
#define be32_to_cpu __be32_to_cpu
#define cpu_to_be16 __cpu_to_be16
#define be16_to_cpu __be16_to_cpu
#define cpu_to_le64p __cpu_to_le64p
#define le64_to_cpup __le64_to_cpup
#define cpu_to_le32p __cpu_to_le32p
#define le32_to_cpup __le32_to_cpup
#define cpu_to_le16p __cpu_to_le16p
#define le16_to_cpup __le16_to_cpup
#define cpu_to_be64p __cpu_to_be64p
#define be64_to_cpup __be64_to_cpup
#define cpu_to_be32p __cpu_to_be32p
#define be32_to_cpup __be32_to_cpup
#define cpu_to_be16p __cpu_to_be16p
#define be16_to_cpup __be16_to_cpup
#define cpu_to_le64s __cpu_to_le64s
#define le64_to_cpus __le64_to_cpus
#define cpu_to_le32s __cpu_to_le32s
#define le32_to_cpus __le32_to_cpus
#define cpu_to_le16s __cpu_to_le16s
#define le16_to_cpus __le16_to_cpus
#define cpu_to_be64s __cpu_to_be64s
#define be64_to_cpus __be64_to_cpus
#define cpu_to_be32s __cpu_to_be32s
#define be32_to_cpus __be32_to_cpus
#define cpu_to_be16s __cpu_to_be16s
#define be16_to_cpus __be16_to_cpus
 * They have to be macros in order to do the constant folding
 * correctly - if the argument passed into a inline function
 * it is no longer constant according to gcc..
#undef ntohl
#undef ntohs
#undef htonl
#undef htons
#define ___htonl(x) __cpu_to_be32(x)
#define ___htons(x) __cpu_to_be16(x)
#define ___ntohl(x) __be32_to_cpu(x)
#define ___ntohs(x) __be16_to_cpu(x)
#define htonl(x) ___htonl(x)
#define ntohl(x) ___ntohl(x)
#define htons(x) ___htons(x)
#define ntohs(x) ___ntohs(x)
static inline void le16_add_cpu(__le16 *var, u16 val)
	*var = cpu_to_le16(le16_to_cpu(*var) + val);
static inline void le32_add_cpu(__le32 *var, u32 val)
	*var = cpu_to_le32(le32_to_cpu(*var) + val);
static inline void le64_add_cpu(__le64 *var, u64 val)
	*var = cpu_to_le64(le64_to_cpu(*var) + val);
static inline void be16_add_cpu(__be16 *var, u16 val)
	*var = cpu_to_be16(be16_to_cpu(*var) + val);
static inline void be32_add_cpu(__be32 *var, u32 val)
	*var = cpu_to_be32(be32_to_cpu(*var) + val);
static inline void be64_add_cpu(__be64 *var, u64 val)
	*var = cpu_to_be64(be64_to_cpu(*var) + val);
#endif /* _LINUX_BYTEORDER_GENERIC_H */
Sunbelt Computer Software

PL/B Language Development and Support

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Sunbelt Computer Software

PL/B Language Development and Support

Uh oh!

FilesExpand file tree

generic.h

Latest commit

History

generic.h

File metadata and controls
