Fastled is not compiling for NodeMCU 1.0 (ESP-12E Module).

Seems Fastled is not compiling through the arduino IDE for the NodeMCU 1.0 (ESP-12E Module).

I wrote and tested a simple sketch that is working on the WEMOS D1 R1 (also esp8266 based)

When I try and compile te same sketch for the LOLIN NodeMCU V3 with the 1.0 (ESP-12E Module) I get this Error.

exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).

Below the sketch I wrote to test 2 ledstrips on 2 data pins.


#include "FastLED.h"
#define DATA_PIN_A  12 //d6 on nodemcu esp8266
#define DATA_PIN_B  13 //d7 on nodemcu esp8266
#define CLK_PIN     14 //d5 on nodemcu esp8266
#define LED_TYPE  APA102
#define COLOR_ORDER  BGR
#define NUM_LEDS  30 // per strand
CRGB leds_A [NUM_LEDS];
CRGB leds_B [NUM_LEDS];

void setup() {
  delay(3000); // 3 second delay for recovery
  FastLED.addLeds<LED_TYPE,DATA_PIN_A,CLK_PIN,COLOR_ORDER>(leds_A, NUM_LEDS).setCorrection(TypicalLEDStrip);
  FastLED.addLeds<LED_TYPE,DATA_PIN_B,CLK_PIN,COLOR_ORDER>(leds_B, NUM_LEDS).setCorrection(TypicalLEDStrip);
  FastLED.setBrightness(96);
}

void loop() { 
  // Fill leds with rainbow
  fill_rainbow(leds_A, NUM_LEDS, millis());
  FastLED.show();
  delay(2000);

  fill_solid(leds_B, NUM_LEDS, CRGB::Yellow);
  FastLED.show();
  delay(2000);

  // Turn leds off
  fill_solid(leds_A, NUM_LEDS, CRGB::Black);  // Set all leds black
  FastLED.show();
  delay(1000);
  // Turn leds off
  fill_solid(leds_B, NUM_LEDS, CRGB::Black);  // Set all leds black
  FastLED.show();
  delay(1000);
  
}

I’d need to see the full build output - but I suspect this is a compiler bug

Arduino: 1.8.9 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled, 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\HP\AppData\Local\Arduino15\packages -hardware C:\Users\HP\Documents\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\HP\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\HP\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:xtal=80,vt=flash,exception=disabled,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -vid-pid=1A86_7523 -ide-version=10809 -build-path C:\Users\HP\AppData\Local\Temp\arduino_build_358501 -warnings=none -build-cache C:\Users\HP\AppData\Local\Temp\arduino_cache_368860 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.esptool-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -verbose C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\HP\AppData\Local\Arduino15\packages -hardware C:\Users\HP\Documents\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\HP\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\HP\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:xtal=80,vt=flash,exception=disabled,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -vid-pid=1A86_7523 -ide-version=10809 -build-path C:\Users\HP\AppData\Local\Temp\arduino_build_358501 -warnings=none -build-cache C:\Users\HP\AppData\Local\Temp\arduino_cache_368860 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.esptool-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\esptool\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs-2.5.0-3-20ed2b9.path=C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\2.5.0-3-20ed2b9 -verbose C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino
Using board 'nodemcuv2' from platform in folder: C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0
Using core 'esp8266' from platform in folder: C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0
Detecting libraries used...
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\sketch\sketch_mar22a.ino.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\sketch\sketch_mar22a.ino.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\FastLED.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\bitswap.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\colorpalettes.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\colorutils.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\hsv2rgb.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\lib8tion.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\noise.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\power_mgt.cpp" -o nul
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\Documents\Arduino\libraries\FastLED\wiring.cpp" -o nul
Generating function prototypes...
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -fno-exceptions -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\sketch\sketch_mar22a.ino.cpp" -o "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\preproc\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\Users\HP\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-3-20ed2b9/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/lwip2/include" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\Users\HP\AppData\Local\Temp\arduino_build_358501/core" -c -w -Os -g -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=c++11 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10809 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD="ESP8266_NODEMCU"" -DFLASHMODE_DIO -DESP8266 "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266" "-IC:\Users\HP\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.0\variants\nodemcu" "-IC:\Users\HP\Documents\Arduino\libraries\FastLED" "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\sketch\sketch_mar22a.ino.cpp" -o "C:\Users\HP\AppData\Local\Temp\arduino_build_358501\sketch\sketch_mar22a.ino.cpp.o"
In file included from C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:1:0:

C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:14:21: note: #pragma message: FastLED version 3.002.006

pragma message "FastLED version 3.002.006"

In file included from C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:65:0,

             from C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:1:

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi.h:110:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output

pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"

In file included from C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:48:0,

             from C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:1:

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h: In instantiation of 'class FastPin<12u>':

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:22:49: required from 'class AVRSoftwareSPIOutput<12u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi.h:30:7: required from 'class SPIOutput<12u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/chipsets.h:157:6: required from 'class LPD6803Controller<12u, 14u, (EOrder)136u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:253:77: required from 'static CLEDController& CFastLED::addLeds(CRGB*, int, int) [with ESPIChipsets CHIPSET = (ESPIChipsets)6u; unsigned char DATA_PIN = 12u; unsigned char CLOCK_PIN = 14u; EOrder RGB_ORDER = (EOrder)136u]'

C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:13:76: required from here

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h:207:2: error: static assertion failed: Invalid pin specified

static_assert(validpin(), "Invalid pin specified");

^

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h: In instantiation of 'class FastPin<14u>':

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:23:50: required from 'class AVRSoftwareSPIOutput<12u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi.h:30:7: required from 'class SPIOutput<12u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/chipsets.h:157:6: required from 'class LPD6803Controller<12u, 14u, (EOrder)136u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:253:77: required from 'static CLEDController& CFastLED::addLeds(CRGB*, int, int) [with ESPIChipsets CHIPSET = (ESPIChipsets)6u; unsigned char DATA_PIN = 12u; unsigned char CLOCK_PIN = 14u; EOrder RGB_ORDER = (EOrder)136u]'

C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:13:76: required from here

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h:207:2: error: static assertion failed: Invalid pin specified

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h: In instantiation of 'class FastPin<13u>':

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:22:49: required from 'class AVRSoftwareSPIOutput<13u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastspi.h:30:7: required from 'class SPIOutput<13u, 14u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/chipsets.h:157:6: required from 'class LPD6803Controller<13u, 14u, (EOrder)136u, 6u>'

C:\Users\HP\Documents\Arduino\libraries\FastLED/FastLED.h:253:77: required from 'static CLEDController& CFastLED::addLeds(CRGB*, int, int) [with ESPIChipsets CHIPSET = (ESPIChipsets)6u; unsigned char DATA_PIN = 13u; unsigned char CLOCK_PIN = 14u; EOrder RGB_ORDER = (EOrder)136u]'

C:\Users\HP\Documents\Arduino\sketch_mar22a\sketch_mar22a.ino:14:76: required from here

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h:207:2: error: static assertion failed: Invalid pin specified

Using library FastLED at version 3.2.6 in folder: C:\Users\HP\Documents\Arduino\libraries\FastLED
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).

p.s. When I compile anything else for the LOLIN NodeMCU V3 with the 1.0 (ESP-12E Module) I dont get the compiling error.

I tried the adafruit Dotstar strandtest -> Working
I tried the APA102 Example by Polulu https://github.com/pololu/apa102-arduino -> Working

Only Fastled does not want to compile, and I realy want to use the best library there is = Fastled!

If you need anything else I will try my best to suply info. I am a bit of a noob though so you might have to guide me a bit to get more debug info etc...

This error:

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h:207:2: error: static assertion failed: Invalid pin specified

static_assert(validpin(), "Invalid pin specified");

^

C:\Users\HP\Documents\Arduino\libraries\FastLED/fastpin.h: In instantiation of 'class FastPin<14u>':

Is what’s wrong - https://github.com/FastLED/FastLED/wiki/ESP8266-notes has some notes about PIN numbers and mappings and such

Thank you so much,

I instantly found the solution in the link you gave me.

Apparently I needed to difine #define FASTLED_ESP8266_NODEMCU_PIN_ORDER
To tell Fastled I am using the LOLIN NodeMCU V3 with the 1.0 (ESP-12E Module)

I would never have figure that out myself, since I thought choosing this board in the arduino board manager would be sufficient.

Just now had a LOLIN NodeMCU V3 with the 1.0 (ESP-12E Module) laying around when I read your reply, plugged it in, tried compiling the same code I did before with the additional #define FASTLED_ESP8266_NODEMCU_PIN_ORDER code, And it works.

#include <FastLED.h>

#define FASTLED_ESP8266_NODEMCU_PIN_ORDER // The solution !!!!!!!!!!!!!!!!!!
#define DATA_PIN_A  12 //d6 on nodemcu esp8266
#define DATA_PIN_B  13 //d7 on nodemcu esp8266
#define CLK_PIN     14 //d5 on nodemcu esp8266
#define LED_TYPE  APA102
#define COLOR_ORDER  BGR
#define NUM_LEDS  30 // per strand
CRGB leds_A [NUM_LEDS];
CRGB leds_B [NUM_LEDS];

void setup() {
  delay(3000); // 3 second delay for recovery
  FastLED.addLeds<LED_TYPE,DATA_PIN_A,CLK_PIN,COLOR_ORDER>(leds_A, NUM_LEDS).setCorrection(TypicalLEDStrip);
  FastLED.addLeds<LED_TYPE,DATA_PIN_B,CLK_PIN,COLOR_ORDER>(leds_B, NUM_LEDS).setCorrection(TypicalLEDStrip);
  FastLED.setBrightness(96);
}

void loop() { 
  // Fill leds with rainbow
  fill_rainbow(leds_A, NUM_LEDS, millis());
  FastLED.show();
  delay(2000);

  fill_solid(leds_B, NUM_LEDS, CRGB::Yellow);
  FastLED.show();
  delay(2000);

  // Turn leds off
  fill_solid(leds_A, NUM_LEDS, CRGB::Black);  // Set all leds black
  FastLED.show();
  delay(1000);
  // Turn leds off
  fill_solid(leds_B, NUM_LEDS, CRGB::Black);  // Set all leds black
  FastLED.show();
  delay(1000);
  
}

For refference, the working code with the solution.

Thank you for your time,

chore(release): 3.10.3 -> 3.10.4 — bump zccache floor to 1.12.7 (#3115)

Sunbelt Computer Software

PL/B Language Development and Support

Navigation Menu

Repository navigation

Fastled is not compiling for NodeMCU 1.0 (ESP-12E Module). #761

pragma message "FastLED version 3.002.006"

pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Sunbelt Computer Software

PL/B Language Development and Support

Fastled is not compiling for NodeMCU 1.0 (ESP-12E Module). #761

Description

Activity

focalintent commented on Mar 23, 2019

JanBosNL commented on Mar 23, 2019

pragma message "FastLED version 3.002.006"

pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"

JanBosNL commented on Mar 23, 2019

focalintent commented on Mar 23, 2019

JanBosNL commented on Mar 24, 2019

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions